{"title":"Nozar Diamond Tools","description":null,"products":[{"product_id":"nozar-allrounder-set-fuer-fliesenleger-im-aluminiumkoffer","title":"Nozar All-Purpose Set for Tile Layers in an Aluminum Case","description":"\u003ch2\u003eNozar Allrounder Set for Tile Layers in Aluminum Case\u003c\/h2\u003e\u003cp\u003eThe Nozar Allrounder set combines eight tile drill bits with a Fliese Cobra cutting disc. The set is intended for tile layers who need to make openings and cut tiles when working on a surface covering. The aluminum case keeps the tools together in an easy-to-organize set.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eEight tile drill bits with diameters of 20, 25, 32, 35, 40, 50, 60 and 68 mm.\u003c\/li\u003e\n\n\u003cli\u003eAdditionally, a Fliese Cobra diamond cutting disc with a diameter of 125 mm.\u003c\/li\u003e\n\n\u003cli\u003eSet assembled by the manufacturer.\u003c\/li\u003e\n\n\u003cli\u003eStorage in an aluminum case.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe different drill bit sizes allow selection based on the required opening. The actual installation dimensions of connections or components remain the determining factor. The Cobra cutting disc complements the set for cutting suitable tile materials. Drilling and cutting tools perform different tasks and must therefore be mounted and used according to their respective markings.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6729810\u003c\/td\u003e\n\n\u003ctd\u003eDrill bits: 20, 25, 32, 35, 40, 50, 60, 68 mm; cutting disc: Fliese Cobra 125 mm; aluminum case\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe Allrounder set can be clearly identified by the part number 6729810. Other Nozar case sets may look similar externally but may contain different diameters or a different cutting disc. Before using an individual tool, its mount, permissible speed and specific material approval must be checked against the machine. The case contents include the tools described; a machine is not listed as a component.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhich drill bit diameters are included?\u003c\/h4\u003e\u003cp\u003e20, 25, 32, 35, 40, 50, 60 and 68 mm, each as part of the described set.\u003c\/p\u003e\u003ch4\u003eWhich cutting disc is included?\u003c\/h4\u003e\u003cp\u003eA Nozar Fliese Cobra with a diameter of 125 mm.\u003c\/p\u003e\u003ch4\u003eCan a single operating specification be used for the entire set?\u003c\/h4\u003e\u003cp\u003eNo. The respective tool marking and the corresponding machine approval apply to each drill bit and cutting disc.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"Default Title","offer_id":55529279324501,"sku":"NOZ-ALLSET-6729810-1","price":221.05,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-beton-universal-10-diamant-trennscheibe","title":"Nozar Concrete Universal 10 Diamond Cutting Disc","description":"\u003ch2\u003eNozar Concrete Universal 10 Diamond Cutting Disc\u003c\/h2\u003e\u003cp\u003eThe Nozar Concrete Universal 10 is a segmented diamond cutting disc from the Basic Line for standard cuts in concrete products and general building materials. Designed for soft to medium-hard building materials, it is a practical choice for medium-duty cutting. The 10 mm high diamond segments form the working surface, while the various disc diameters allow you to choose the right one for your machine.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDesigned for concrete products and soft to medium-hard general building materials.\u003c\/li\u003e\n\n\u003cli\u003eSegmented cutting edge with a segment height of 10 mm.\u003c\/li\u003e\n\n\u003cli\u003eVarious diameters with a 22.23 mm mounting hole.\u003c\/li\u003e\n\n\u003cli\u003eBasic Line design for manageable, recurring standard cuts.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eTypical applications include cutting to length and trimming suitable concrete components on site. The suitability of the specific building material is crucial: the \"Universal\" designation does not replace material testing. Securely position the workpiece and guide the disc along the intended cut line without tilting. The machine, safety guard, and tool must be approved for the selected dimensions.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6700006\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Hole (mm): 22.23; Number of segments: 9; Segment length (mm): 37; Segment width (mm): 2.0; Segment height (mm): 10.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6700009\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 230; Hole (mm): 22.23; Number of segments: 18; Segment length (mm): 33; Segment width (mm): 2.4; Segment height (mm): 10.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Use\u003c\/h3\u003e\u003cp\u003eFirst, choose the diameter permitted by your machine, then check the mounting hole and required cutting depth. The 125 mm version has nine segments, while the 230 mm version has 18. For very hard special materials, a disc specifically designed for this purpose should be selected. The permitted speed and method of use are determined by the tool markings and machine instructions.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhat building materials is Concrete Universal 10 designed for?\u003c\/h4\u003e\u003cp\u003eIt is designed for concrete products and general building materials in the soft to medium-hard range; the manufacturer recommends it for medium-duty cutting.\u003c\/p\u003e\u003ch4\u003eCan a 230 mm disc be used on a 125 mm angle grinder?\u003c\/h4\u003e\u003cp\u003eNo. The machine's maximum permitted disc diameter must be observed. A matching mounting hole alone is not sufficient proof of suitability.\u003c\/p\u003e\u003ch4\u003eWhat does the 10 in the product name mean?\u003c\/h4\u003e\u003cp\u003eIt refers to the 10 mm high diamond segments of this series.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then a quantity of 1, 3, or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 22.23 mm \/ 1 piece","offer_id":55529279488341,"sku":"NOZ-BETU10-125X22-23-6700006-1","price":13.43,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 3 pieces","offer_id":55529279521109,"sku":"NOZ-BETU10-125X22-23-6700006-3","price":38.96,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 6 pieces","offer_id":55529279553877,"sku":"NOZ-BETU10-125X22-23-6700006-6","price":72.55,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 1 piece","offer_id":55529279586645,"sku":"NOZ-BETU10-230X22-23-6700009-1","price":25.89,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 3 pieces","offer_id":55529279619413,"sku":"NOZ-BETU10-230X22-23-6700009-3","price":75.09,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 6 pieces","offer_id":55529279652181,"sku":"NOZ-BETU10-230X22-23-6700009-6","price":139.82,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/0634\/4021\/files\/6700000.jpg?v=1793023425"},{"product_id":"nozar-butterfly-diamant-schleifteller-fuer-beton-und-estrich","title":"Nozar Butterfly Diamond Grinding Plate for Concrete and Screed","description":"\u003ch2\u003eNozar Butterfly Diamond Grinding Disc for Concrete and Screed\u003c\/h2\u003e\u003cp\u003eThe Nozar Butterfly is a Premium Line diamond grinding disc for concrete, concrete products, abrasive concrete, and screed. Its characteristic butterfly-shaped segments are designed for high material removal and a uniform grinding finish. The manufacturer describes a universal segment alloy for concrete and screed, as well as a design that supports dust extraction directly at the segment area.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor concrete and screed, including abrasive concrete surfaces.\u003c\/li\u003e\n\n\u003cli\u003eButterfly segment shape for uniform grinding.\u003c\/li\u003e\n\n\u003cli\u003eInduction-welded segments according to the manufacturer's catalog.\u003c\/li\u003e\n\n\u003cli\u003e125 mm version with six segments and a 22 mm profile height.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe grinding disc is suitable for processing suitable floor and wall surfaces with a compatible concrete grinder. It is used when grinding marks and material removal are to be distributed evenly across the surface. The shape of the tool supports dust removal but does not replace a suitable dust hood or extraction system. Assemble the machine and accessories according to their instructions.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6701226\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Number of segments: 6; Profile height: 22 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe available 125 mm version has a 22.23 mm bore. When choosing a replacement tool, the profile height and machine approval are also important. The series also includes special mounts for other machines; such variants are not interchangeable without inspection. When changing a tool, therefore compare the complete size specification with the existing mount and the available space under the dust hood.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eFor which surfaces is the Butterfly suitable?\u003c\/h4\u003e\u003cp\u003eNozar lists concrete, concrete products, abrasive concrete, and screed.\u003c\/p\u003e\u003ch4\u003eWhat mount does the 125 mm version have?\u003c\/h4\u003e\u003cp\u003eItem 6701226 has a 22.23 mm bore and a 22 mm profile height.\u003c\/p\u003e\u003ch4\u003eCan every Butterfly size run on the same machine?\u003c\/h4\u003e\u003cp\u003eNo. The diameter, bore, and profile height differ in some cases. The complete variant specification must be checked against the machine.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 22.23 mm","offer_id":55529280012629,"sku":"NOZ-BUTTER-125X22-23-6701226-1","price":106.55,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-dra-diamant-schleifteller-fuer-estrich-und-abrasive-baustoffe","title":"Nozar DRA Diamond Grinding Plate for Screed and Abrasive Building Materials","description":"\u003ch2\u003eNozar DRA Diamond Grinding Disc for Screed and Abrasive Building Materials\u003c\/h2\u003e\u003cp\u003eThe Nozar DRA is a diamond grinding disc for abrasive, relatively soft mineral building materials. Its range of applications includes, among others, screed, fresh concrete, aerated concrete and plaster. The diamond segments are arranged in two rows. The Profi-Line tool is suitable for processing corresponding surfaces with a suitable angle or concrete grinder.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor screed, fresh concrete, aerated concrete or porous concrete and plaster.\u003c\/li\u003e\n\n\u003cli\u003eAlso for lightweight building blocks, soft fireclay, soft limestone and sandstones and hollow blocks.\u003c\/li\u003e\n\n\u003cli\u003eDouble-row segment design with a segment height of 5 mm.\u003c\/li\u003e\n\n\u003cli\u003eFor leveling screed and removing screed overhangs.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eFor substrate preparation, the DRA can be used for trimming and finishing suitable mineral surfaces. The material range distinguishes it from the DRB, which is described for concrete and hard limestone and sandstone. The bond should therefore be selected according to the actual substrate. Uniform grinding pressure and suitable dust extraction support controlled processing.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6701314\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe available version has a diameter of 125 mm and a mounting bore of 22.23 mm. In addition, the required working space of the machine must be checked before installation. The product name and bore alone do not prove full machine compatibility. For larger grinding machines, the catalog lists another version; this is to be selected based on its own dimensions.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhat distinguishes DRA from DRB?\u003c\/h4\u003e\u003cp\u003eDRA is described for abrasive building materials such as screed and fresh concrete; DRB for concrete and hard limestone and sandstone.\u003c\/p\u003e\u003ch4\u003eCan I remove screed overhangs with it?\u003c\/h4\u003e\u003cp\u003eYes, the removal of screed overhangs is expressly listed among the stated applications.\u003c\/p\u003e\u003ch4\u003eIs the grinding disc suitable for every 125 mm machine?\u003c\/h4\u003e\u003cp\u003eThis must be checked based on the mounting, construction height, protective guard and machine approval. The outer diameter alone is not sufficient.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 22.23 mm","offer_id":55529280274773,"sku":"NOZ-DRA-125X22-23-6701314-1","price":77.01,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/0634\/4021\/files\/6701310.jpg?v=1793023428"},{"product_id":"nozar-drb-diamant-schleifteller-fuer-beton","title":"Nozar DRB Diamond Grinding Plate for Concrete","description":"\u003ch2\u003eNozar DRB Diamond Grinding Disc for Concrete\u003c\/h2\u003e\u003cp\u003eThe Nozar DRB is a double-segmented diamond grinding disc for concrete and hard aerated concrete. The two-row arrangement of the grinding surface is designed for uniform progress and a clean surface. The Profi-Line tool is suitable for hand-grinding work with a suitable angle grinder or concrete grinder, especially for the final finishing of concrete elements.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDouble-row diamond segmentation.\u003c\/li\u003e\n\n\u003cli\u003eFor concrete, hard aerated concrete, and suitable universal grinding tasks.\u003c\/li\u003e\n\n\u003cli\u003e5 mm segment height.\u003c\/li\u003e\n\n\u003cli\u003eFor suitable angle grinders and concrete grinders; select the height suitable for the machine.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe DRB is used for processing mineral surfaces when irregularities need to be reduced and concrete surfaces need to be reworked. The substrate, required removal, and machine guidance must be coordinated. Work with uniform contact to prevent unnecessary depressions. A dust extraction hood suitable for the machine and the required dust collection are part of the preparation for mineral grinding work.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6701215\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Height: 23 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eFor the grinding disc, the diameter is not sufficient as a selection criterion: the bore and height must also fit the machine. The available 125 mm version 6701215 has a 22.23 mm bore and a height of 23 mm. Other DRB variants may have a different height for the same diameter. Therefore, check the required distance to the protective or extraction hood using the machine documentation.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eHow do the DRB variants differ?\u003c\/h4\u003e\u003cp\u003eIn addition to the diameter, they differ particularly in height. The combination of diameter, bore, and height determines the suitable version.\u003c\/p\u003e\u003ch4\u003eIs the DRB suitable for cutting?\u003c\/h4\u003e\u003cp\u003eIt is a grinding disc for surface processing. A cutting disc designed for this purpose is used for cutting.\u003c\/p\u003e\u003ch4\u003eWhat does the double row stand for?\u003c\/h4\u003e\u003cp\u003eThe diamond segments are arranged in two circumferential rows and form the working surface of the grinding disc.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 22.23 mm \/ BH 23 mm","offer_id":55529280602453,"sku":"NOZ-DRB-125X22-23-6701215-1","price":77.01,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/0634\/4021\/files\/6701210.jpg?v=1793023429"},{"product_id":"nozar-diamant-fliesenbohrer-set-m14-7-teilig-6-14-mm","title":"Nozar Diamond Core Drill Bit Set M14, 7-Piece, 6–14 mm","description":"\u003ch2\u003eNozar Diamond Tile Drill Bit Set M14, 7-Piece, 6–14 mm\u003c\/h2\u003e\u003cp\u003eThe seven-piece Nozar diamond tile drill bit set includes five drill diameters for small tile holes in an aluminum case. The most frequently required sizes are provided in pairs: the set contains two 6 mm and two 8 mm drill bits, as well as one each of 10 mm, 12 mm, and 14 mm. All listed tools have an M14 shank and are described as dry drill bits.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSeven drill bits in five diameters.\u003c\/li\u003e\n\n\u003cli\u003eContents: 2 × 6 mm, 2 × 8 mm, 1 × 10 mm, 1 × 12 mm, and 1 × 14 mm.\u003c\/li\u003e\n\n\u003cli\u003eVacuum-brazed diamond coating with cooling wax.\u003c\/li\u003e\n\n\u003cli\u003e35 mm working length; supplied in an aluminum case.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe set is ideal for users who need to drill repeatedly different small holes in tiles during installation work. The duplicate 6 mm and 8 mm bits allow these sizes to be kept readily available. The actual choice of drill bit should always depend on the intended fastening method and the specifications of the fastener manufacturer. The tools are not supplied as solid-material drill bits with round shanks.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6724203\u003c\/td\u003e\n\n\u003ctd\u003eContents: 2 × 6 mm; 2 × 8 mm; 1 × 10 mm; 1 × 12 mm; 1 × 14 mm; Shank: M14; Working length: 35 mm; Cooling wax; Aluminum case\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Handling\u003c\/h3\u003e\u003cp\u003eBefore use, check the M14 shank, machine suitability, and operating data of the individual tools. The size indicates the respective drill diameter; the working length for all bits is 35 mm. The case is for the organized storage of the seven drill bits. A machine or additional adapters are not included in the described scope of delivery. Larger installation openings require a correspondingly larger drill diameter.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhy does the seven-piece set contain only five sizes?\u003c\/h4\u003e\u003cp\u003eThe 6 mm and 8 mm sizes are each included twice, while the 10 mm, 12 mm, and 14 mm sizes are each included once.\u003c\/p\u003e\u003ch4\u003eIs the set designed for a standard drill chuck?\u003c\/h4\u003e\u003cp\u003eThe tools have an M14 shank. A suitable machine mount or expressly approved accessory is required.\u003c\/p\u003e\u003ch4\u003eWhat is included in the scope of delivery?\u003c\/h4\u003e\u003cp\u003eThe seven listed diamond tile drill bits and the aluminum case. A machine is not included in the manufacturer's description.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"Default Title","offer_id":55529280700757,"sku":"NOZ-FBS7-6724203-1","price":119.1,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-diamant-handpad-90-55-mm","title":"Nozar Diamond Hand Pad 90 × 55 mm","description":"\u003ch2\u003eNozar Diamond Hand Pad 90 × 55 mm\u003c\/h2\u003e\u003cp\u003eNozar diamond hand pads enable the manual finishing of natural stone and porcelain stoneware. With their handy size of 90 × 55 mm, they are particularly suitable for edges, small areas, and spots that are difficult for larger machine tools to reach. Different grits allow the work process to be adjusted to the desired material removal and surface quality.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCompact hand size of 90 × 55 mm.\u003c\/li\u003e\n\n\u003cli\u003eFor working natural stone and porcelain stoneware.\u003c\/li\u003e\n\n\u003cli\u003eFor chamfering tile edges and finishing hard-to-reach areas.\u003c\/li\u003e\n\n\u003cli\u003eGrit and color coding make it easy to identify the pad.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe pad is guided by hand and is suitable, for example, for breaking sharp cut edges after cutting tiles. The manufacturer recommends keeping the diamond coating slightly damp at all times. For uniform results, the work should be distributed over the entire edge and initially tested on an inconspicuous area or a sample piece. The grit should be selected according to the intended work step.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6701350\u003c\/td\u003e\n\n\u003ctd\u003eDimensions: 90 × 55 mm; K60; Green\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6701351\u003c\/td\u003e\n\n\u003ctd\u003eDimensions: 90 × 55 mm; K120; Black\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eGrit 60 is green and intended for a coarser work step; grit 120 is black and enables finer subsequent processing. Other grits in the series are used for graduated finishing. A single pad contains only the selected grit. The color specification is an identification of the tool and does not describe a color that is to be transferred to the material.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eDoes the pad need to be mounted on a machine?\u003c\/h4\u003e\u003cp\u003eNo. This product is a hand pad and is guided manually.\u003c\/p\u003e\u003ch4\u003eShould the diamond coating remain dry?\u003c\/h4\u003e\u003cp\u003eNozar recommends keeping the coating slightly damp during work.\u003c\/p\u003e\u003ch4\u003eWhat is the difference between grit 60 and grit 120?\u003c\/h4\u003e\u003cp\u003eGrit 60 is suitable for a coarser processing step; grit 120 for the finer continuation. The appropriate sequence depends on the material and the desired surface.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"K60","offer_id":55529280897365,"sku":"NOZ-HPAD-K60-6701350-1","price":23.2,"currency_code":"EUR","in_stock":false},{"title":"K120","offer_id":55529280930133,"sku":"NOZ-HPAD-K120-6701351-1","price":21.08,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/0634\/4021\/files\/6701350.jpg?v=1793023431"},{"product_id":"nozar-fliese-turbo-f-diamant-trennscheibe","title":"Nozar Fliese Turbo F Diamond Cutting Disc","description":"\u003ch2\u003eNozar Fliese Turbo F Diamond Cutting Disc\u003c\/h2\u003e\u003cp\u003eThe Nozar Fliese Turbo F is a Basic Line diamond cutting disc for tiles, ceramics, porcelain stoneware, and thin natural stones. The continuous cutting edge is designed for a fine, easily guided cut. A reinforced flange supports the stability of the tool. The series thus offers a clear selection for typical fitting and cutting work when laying ceramic tiles.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous cutting edge for tile and ceramic cutting.\u003c\/li\u003e\n\n\u003cli\u003eAlso described in the catalog for porcelain stoneware and thin natural stones.\u003c\/li\u003e\n\n\u003cli\u003eReinforced flange.\u003c\/li\u003e\n\n\u003cli\u003e125 mm version with 1.2 mm segment width and 8 mm coating height.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe Turbo F is used when tiles need to be adapted to wall connections, room corners, or the planned installation area. Workpiece support and smooth guidance influence the cut edge. Especially with coated or sensitive surfaces, a test piece should be checked before series cutting. Do not apply lateral pressure or tilt the disc during cutting.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Item\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6702201\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Segment width (mm): 1.2; Segment height (mm): 8.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe available version has a 125 mm outer diameter and a 22.23 mm bore. For other sizes in the series, the segment width and sometimes the coating height change; technical specifications should therefore always be taken from the selected version. Fliese Turbo F is also not automatically equated with a differently named Nozar Turbo tile disc. The item number and dimensions enable a clear selection.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eFor which tiles is Turbo F intended?\u003c\/h4\u003e\u003cp\u003eThe manufacturer lists tiles, ceramics, porcelain stoneware, and thin natural stones.\u003c\/p\u003e\u003ch4\u003eHow wide is the 125 mm version?\u003c\/h4\u003e\u003cp\u003eIts segment width is 1.2 mm with a coating height of 8 mm.\u003c\/p\u003e\u003ch4\u003eIs the cutting edge interrupted?\u003c\/h4\u003e\u003cp\u003eThe product series has a continuous cutting edge. The exact turbo structure is to be distinguished from the product designation and image.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3, or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price of this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 22.23 mm \/ 1 piece","offer_id":55529281159509,"sku":"NOZ-TURBOF-125X22-23-6702201-1","price":22.14,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 3 pieces","offer_id":55529281192277,"sku":"NOZ-TURBOF-125X22-23-6702201-3","price":64.21,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 6 pieces","offer_id":55529281225045,"sku":"NOZ-TURBOF-125X22-23-6702201-6","price":119.55,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-fliese-viper-diamant-trennscheibe","title":"Nozar Fliese Viper Diamond Cutting Disc","description":"\u003ch2\u003eNozar Fliese Viper Diamond Cutting Disc\u003c\/h2\u003e\u003cp\u003eThe Nozar Fliese Viper is a thin diamond cutting disc from the Premium Line for hard ceramic coverings and natural stone tiles. The narrow 1.2 mm cutting area and the 10 mm high ornamental segment are designed for a fine cut. A reinforced flange stabilizes the tool body. The Viper is ideal for tilers and interior fitters who make visible cuts in sophisticated coverings.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor very hard porcelain stoneware, granite slabs and artificial stone tiles.\u003c\/li\u003e\n\n\u003cli\u003eAlso suitable for ceramic, terracotta and marble.\u003c\/li\u003e\n\n\u003cli\u003e1.2 mm cutting width for coverings up to 10 mm thick.\u003c\/li\u003e\n\n\u003cli\u003eClosed cutting edge with ornamental structure and reinforced flange.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe disc is suitable for cutting and trimming the coverings mentioned above. Clean results also depend on the workpiece support, feed rate and condition of the cutting edge. For glazed or particularly sensitive surfaces, a test cut on a sample piece is recommended. Prepare the workpiece and cutting path before starting so that the disc can be guided straight.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6700301\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Segment width (mm): 1.2; Segment height (mm): 10.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThis version measures 125 mm in diameter and has a 22.23 mm bore. It is intended for use as a cutting tool; surface grinding requires a tool designed for that purpose. Before mounting, compare the dimensions and maximum speed with the machine and guard. The product description does not replace the machine manual.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs the Viper suitable for hard porcelain stoneware?\u003c\/h4\u003e\u003cp\u003eYes. Hard porcelain stoneware and hard ceramic are among the main applications of the series.\u003c\/p\u003e\u003ch4\u003eHow wide is the cutting area?\u003c\/h4\u003e\u003cp\u003eAccording to the manufacturer's data, the 125 mm version has a segment width of 1.2 mm.\u003c\/p\u003e\u003ch4\u003eCan I grind with the side surface?\u003c\/h4\u003e\u003cp\u003eThe product is described as a cutting disc. For side grinding, a grinding tool approved for that purpose should be selected.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3 or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 22.23 mm \/ 1 piece","offer_id":55529281454421,"sku":"NOZ-VIPER-125X22-23-6700301-1","price":48.84,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 3 pieces","offer_id":55529281487189,"sku":"NOZ-VIPER-125X22-23-6700301-3","price":141.63,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 6 pieces","offer_id":55529281519957,"sku":"NOZ-VIPER-125X22-23-6700301-6","price":263.72,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/0634\/4021\/files\/6700300.jpg?v=1793023433"},{"product_id":"nozar-fugenfrei-spezial-diamantscheibe-100-mm-0-8-mm","title":"Nozar Fugenfrei Special Diamond Disc 100 mm, 0.8 mm","description":"\u003ch2\u003eNozar Fugenfrei Spezial Diamond Disc 100 mm, 0.8 mm\u003c\/h2\u003e\u003cp\u003eThe Nozar Fugenfrei Spezial is a narrow diamond tool for milling out existing tile joints. The 100 mm diameter and 0.8 mm milling width allow access to narrow joints. The manufacturer states that it is suitable for both cement-based jointing material and epoxy resin joints. The disc has a 22.23 mm bore and five segments.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor targeted renovation of existing tile joints.\u003c\/li\u003e\n\n\u003cli\u003e0.8 mm narrow working area.\u003c\/li\u003e\n\n\u003cli\u003eDescribed for cement and epoxy resin joints.\u003c\/li\u003e\n\n\u003cli\u003e100 mm outer diameter, 22.23 mm bore and 5 mm coating height.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eBefore milling, the joint path, actual joint width and depth should be carefully checked. The machine must be able to be guided in a controlled manner so that adjacent tile edges are protected. Especially with narrow joints, a test at an inconspicuous location is recommended. Layers lying behind the jointing material must not be unintentionally affected by an excessive working depth.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6720086\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 100; Bore (mm): 22.23; Number of segments: 5; Segment width (mm): 0.8; Segment height (mm): 5.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe small milling width alone does not guarantee that every joint can be processed. Sufficient clearance, steady tool guidance and the suitability of the machine are crucial. Even with this special tool, the permissible speed, protective guard and mounting must be suitable for the specific application. The product is intended for joint processing; for standard tile cutting, a suitable tile cutting disc should be selected.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs the tool also suitable for epoxy resin joints?\u003c\/h4\u003e\u003cp\u003eYes. Epoxy resin joints are explicitly mentioned in the manufacturer's catalog.\u003c\/p\u003e\u003ch4\u003eHow wide is the working width of the disc?\u003c\/h4\u003e\u003cp\u003eThe specified milling width is 0.8 mm.\u003c\/p\u003e\u003ch4\u003eAre damage-free tile edges guaranteed?\u003c\/h4\u003e\u003cp\u003eNo. The result depends on the joint width, material condition, tool guidance and selected working depth. Work in a controlled manner and perform a test first.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3 or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"1 piece","offer_id":55529281618261,"sku":"NOZ-FUGFREI-6720086-1","price":61.04,"currency_code":"EUR","in_stock":false},{"title":"3 pieces","offer_id":55529281651029,"sku":"NOZ-FUGFREI-6720086-3","price":177.01,"currency_code":"EUR","in_stock":false},{"title":"6 pieces","offer_id":55529281683797,"sku":"NOZ-FUGFREI-6720086-6","price":329.61,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-gres-ultra-s2-diamant-trennscheibe-fuer-nassschneidetische","title":"Nozar GRES Ultra S2 Diamond Cutting Disc for Wet Tablesaws","description":"\u003ch2\u003eNozar GRES Ultra S2 Diamond Cutting Disc for Wet Cutting Tables\u003c\/h2\u003e\u003cp\u003eThe Nozar GRES Ultra S2 is a Premium Line diamond cutting disc for wet cutting hard ceramic slabs. It is designed primarily for fully vitrified ceramic, ceramic patio slabs, and ceramic composite slabs. A continuous core supports stable guidance. For the intended application, the manufacturer requires a wet cutting table with a minimum power of 2.2 kW.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor hard ceramic, hard porcelain, and thin granite.\u003c\/li\u003e\n\n\u003cli\u003eSpecially designed for ceramic patio and composite slabs.\u003c\/li\u003e\n\n\u003cli\u003eUse on a suitable wet cutting table with at least 2.2 kW.\u003c\/li\u003e\n\n\u003cli\u003eRegular sharpening is recommended to maintain consistent cutting performance.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe disc is intended for users who need to cut demanding slab materials precisely on a stationary machine. A functioning water supply, sufficient machine power, and stable slab support are part of the preparation. The feed rate should be adjusted to the specific material. If cutting performance declines, check the condition of the tool and follow the sharpening maintenance recommended by the manufacturer.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6702225\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 350; Bore (mm): 30\/25.4; Segment length (mm): 40; Segment width (mm): 2.4; Segment height (mm): 10.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe available 350 mm version has a 30\/25.4 mm mounting hole. Before ordering and installation, check which mounting hole size is required by the machine and how the supplied version is prepared for it. It has a segment width of 2.4 mm and a coating height of 10 mm. The GRES Ultra S2 is not intended for use as a general-purpose dry cutting disc on an angle grinder.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eCan the GRES Ultra S2 be used dry?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies use on a wet cutting table. This product description does not authorize dry cutting.\u003c\/p\u003e\u003ch4\u003eWhat machine power is required?\u003c\/h4\u003e\u003cp\u003eNozar specifies a minimum of 2.2 kW for the wet cutting table.\u003c\/p\u003e\u003ch4\u003eWhy is regular sharpening beneficial?\u003c\/h4\u003e\u003cp\u003eIt is part of the maintenance recommended by the manufacturer to maintain the cutting performance of the disc.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3, or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"350 × 30\/25.4 mm \/ 1 piece","offer_id":55529282011477,"sku":"NOZ-GRES2-350X30-6702225-1","price":312.56,"currency_code":"EUR","in_stock":false},{"title":"350 × 30\/25.4 mm \/ 3 pieces","offer_id":55529282044245,"sku":"NOZ-GRES2-350X30-6702225-3","price":906.43,"currency_code":"EUR","in_stock":false},{"title":"350 × 30\/25.4 mm \/ 6 pieces","offer_id":55529282077013,"sku":"NOZ-GRES2-350X30-6702225-6","price":1687.83,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/0634\/4021\/files\/nozar-gres-ultra-s2.jpg?v=1793023435"},{"product_id":"nozar-hartmetall-dachpfannenbohrer-1-4-zoll-3er-pack","title":"Nozar Carbide Roof Tile Drill Bit 1\/4 Inch, 3-Pack","description":"\u003ch2\u003eNozar Carbide Roof Tile Drill Bit 1\/4 Inch, Pack of 3\u003c\/h2\u003e\u003cp\u003eThe Nozar carbide roof tile drill bits are designed for drilling into roof tiles and roof stones. The standardized 1\/4-inch hex shank allows for use in a suitable machine chuck. Precision-ground spiral flutes support machining. The individual sizes described here are each offered in a pack of three drill bits of the same diameter.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCarbide design for roof tiles and roof stones.\u003c\/li\u003e\n\n\u003cli\u003e1\/4-inch hex shank.\u003c\/li\u003e\n\n\u003cli\u003e100 mm overall length.\u003c\/li\u003e\n\n\u003cli\u003eThree drill bits of the same size per selected pack.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe drill bits are suitable for corresponding fastening and installation work where roofing material must be drilled through in a controlled manner. In addition to roof tiles, the manufacturer lists slate and other mineral materials such as ceramic, tiles, marble, and granite. The specific material structure as well as the machine and tool approval must be checked before drilling. A secure support helps to prevent the workpiece from slipping.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Item\u003c\/th\u003e\n\n\u003cth\u003eDesign\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6722071\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 5 mm; Chuck: 1\/4 inch hex; Overall length: 100 mm; Working length: 39 mm; Contents: 3 drill bits\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6722072\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 6 mm; Chuck: 1\/4 inch hex; Overall length: 100 mm; Working length: 54 mm; Contents: 3 drill bits\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eFor a diameter of 5 mm, the working length is 39 mm; the 6 mm design has a working length of 54 mm. Overall length and working length are therefore different specifications. The selection must suit not only the required hole diameter but also the component thickness. The pack of 3 of one size is also to be distinguished from the mixed set with multiple diameters.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eDoes the pack contain different sizes?\u003c\/h4\u003e\u003cp\u003eNo. The variants described here each contain three drill bits of the same selected diameter.\u003c\/p\u003e\u003ch4\u003eAre 100 mm the usable drilling length?\u003c\/h4\u003e\u003cp\u003eNo. 100 mm is the overall length. The working length is 39 mm for a diameter of 5 mm and 54 mm for a diameter of 6 mm.\u003c\/p\u003e\u003ch4\u003eWhat chuck is provided?\u003c\/h4\u003e\u003cp\u003eA 1\/4-inch hex shank. The machine chuck must match this.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"5 mm","offer_id":55529282339157,"sku":"NOZ-DACHB-5MM-6722071-1","price":28.7,"currency_code":"EUR","in_stock":false},{"title":"6 mm","offer_id":55529282371925,"sku":"NOZ-DACHB-6MM-6722072-1","price":29.92,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-inox-trennscheiben-a60s-bf41-dose-mit-10-stueck","title":"Nozar Inox A60S-BF41 Cutting Discs, Can of 10 Pieces","description":"\u003ch2\u003eNozar Inox Cutting Discs A60S-BF41, Can of 10\u003c\/h2\u003e\u003cp\u003eThe Nozar Inox A60S-BF41 is a thin cutting disc for stainless steel. This package contains ten discs protected in a metal can. The thin design is intended for controlled cutting of stainless steel components. The manufacturer describes the Inox series as iron- and sulfate-free.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTen cutting discs per can.\u003c\/li\u003e\n\n\u003cli\u003eThin A60S-BF41 design from the Profi Line.\u003c\/li\u003e\n\n\u003cli\u003eFor working on stainless steel.\u003c\/li\u003e\n\n\u003cli\u003e125 mm disc diameter and 1.2 mm disc thickness for the available can.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe discs are suitable, for example, for cutting suitable stainless steel profiles, sheet metal, and pipes. Securely fasten the workpiece and guide the cut straight. A thin cutting disc must not be used as a grinding disc. Suitable clamping devices and the provided protective guard are required for mounting. Check the markings, maximum speed, and any printed expiry date before use.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eDesign\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e7335607-10P\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Thickness (mm): 1.2; Discs per can: 10; Cans per unit: 12; Design: thin, A60S-BF41\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe ordered quantity refers to cans. One can contains ten discs; six cans correspond to 60 discs and twelve cans to 120 discs. The loose disc with part number 7335607 is a different purchasing unit from the can 7335607-10P. The packaging information and the EAN of the can help ensure safe reordering. The bore is listed in the catalog as 22.23 mm.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs the displayed item a single disc or a can?\u003c\/h4\u003e\u003cp\u003eThe basic unit is a can of ten discs.\u003c\/p\u003e\u003ch4\u003eHow many discs do six or twelve cans contain?\u003c\/h4\u003e\u003cp\u003eSix cans contain 60 discs, twelve cans contain 120 discs.\u003c\/p\u003e\u003ch4\u003eCan the thin cutting disc also be used for grinding?\u003c\/h4\u003e\u003cp\u003eNo. It is described as a cutting disc. A tool specifically designed for grinding work is required.\u003c\/p\u003e\u003ch3\u003ePrice of the selected quantity\u003c\/h3\u003e\u003cp\u003eOne order unit corresponds to the selected quantity of 1, 6, or 12 cans. The displayed price applies to this entire quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 1.2 × 22.23 mm \/ 10 discs \/ 1 container (10 slices)","offer_id":55529282699605,"sku":"NOZ-INOX-125X1-2-7335607-10P-1","price":10.57,"currency_code":"EUR","in_stock":false},{"title":"125 × 1.2 × 22.23 mm \/ 10 discs \/ 6 cans (60 slices)","offer_id":55529282732373,"sku":"NOZ-INOX-125X1-2-7335607-10P-6","price":61.32,"currency_code":"EUR","in_stock":false},{"title":"125 × 1.2 × 22.23 mm \/ 10 discs \/ 12 cans (120 slices)","offer_id":55529282765141,"sku":"NOZ-INOX-125X1-2-7335607-10P-12-VE","price":114.19,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/0634\/4021\/files\/7335603.jpg?v=1793023437"},{"product_id":"nozar-jolly-cup-14-diamant-schleifteller-100-mm-m14","title":"Nozar Jolly Cup 14 Diamond Grinding Disc 100 mm M14","description":"\u003ch2\u003eNozar Jolly Cup 14 Diamond Grinding Disc 100 mm M14\u003c\/h2\u003e\u003cp\u003eThe Nozar Jolly Cup 14 is a diamond grinding disc for the dry fine processing of ceramic and porcelain stoneware. The special honeycomb shape of the coating enables controlled processing of tile edges. Angled flanks additionally support work on inside radii. The fine version with 100\/120 grit measures 100 mm and has an M14 mount.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor dry grinding of ceramic and porcelain stoneware.\u003c\/li\u003e\n\n\u003cli\u003eFor edge processing in the 90- and 45-degree range.\u003c\/li\u003e\n\n\u003cli\u003eHoneycomb diamond coating with angled flanks.\u003c\/li\u003e\n\n\u003cli\u003e100\/120 grit, M14 mount and 27 mm height.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe grinding disc complements tile cutting when edges or mitres need to be reworked. Its shape also allows it to be used on inside radii. Guide the machine smoothly and control the contact so that the desired edge shape is created evenly. For visible surfaces, first check on a sample piece how the material reacts to the selected processing.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6729884\u003c\/td\u003e\n\n\u003ctd\u003eDiameter:100 mm; Mount:M14; Height:27 mm; Grit:100\/120\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eNozar specifies a maximum of 12,050 rpm for this tool and suitability for compatible corded and cordless angle grinders. The machine marking and the information on the supplied tool must match. Jolly Cup 14 is a grinding disc; the similarly named Jolly Cut is a different type of product for cutting. Both tools must not be equated in terms of mount, method of operation and permissible load.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs Jolly Cup 14 used dry?\u003c\/h4\u003e\u003cp\u003eYes, the manufacturer describes this version for the dry grinding of porcelain stoneware.\u003c\/p\u003e\u003ch4\u003eWhat grit does the fine version have?\u003c\/h4\u003e\u003cp\u003e100\/120 grit.\u003c\/p\u003e\u003ch4\u003eWhat maximum speed does the manufacturer specify?\u003c\/h4\u003e\u003cp\u003e12,050 rpm. Before use, also check the marking of the specific tool and the machine instructions.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"Default Title","offer_id":55529282994517,"sku":"NOZ-JOLLY14-6729884-1","price":68.24,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-jolly-cut-diamant-trennscheibe-125-mm-fuer-gehrung","title":"Nozar Jolly Cut Diamond Cutting Disc 125 mm for Mitre","description":"\u003ch2\u003eNozar Jolly Cut 125 mm Diamond Cutting Disc for Mitre Cuts\u003c\/h2\u003e\u003cp\u003eThe Nozar Jolly Cut is designed for mitre cuts on ceramic tiles and suitable natural stone tiles. The double-sided diamond coating supports cutting at an angle. With a 125 mm outer diameter, 22.23 mm bore and 25 mm high coating, the disc offers a clearly defined design for demanding tile cutting.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor mitre cuts, especially at 45 degrees.\u003c\/li\u003e\n\n\u003cli\u003eFor porcelain stoneware, ceramic and natural stone tiles, as well as thin granite.\u003c\/li\u003e\n\n\u003cli\u003eAlso suitable for ceramic patio and composite slabs as described in the catalogue.\u003c\/li\u003e\n\n\u003cli\u003eDouble-sided diamond coating and closed edge; 1.6 mm segment width.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe Jolly Cut is used, for example, when preparing slab edges for a mitre joint. A stable support and uniform angle are particularly important because small deviations become noticeable on an edge that will later be visible. For sensitive surfaces, perform a test cut first and adjust the feed rate to the material, thickness and machine.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6720203\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Segment width (mm): 1.6; Segment height (mm): 25.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eCheck the complete machine data before mounting. The double-sided coating is a design feature for the described application, not a general approval for any lateral grinding load. There are separate grinding tools for the subsequent fine grinding of a mitre cut. The Jolly Cut is also distinct from the M14 Jolly Cup 14 grinding disc.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhat is the Jolly Cut particularly suitable for?\u003c\/h4\u003e\u003cp\u003eFor mitre cuts on ceramic and natural stone tiles, including at a 45-degree angle.\u003c\/p\u003e\u003ch4\u003eWhat mounting does it have?\u003c\/h4\u003e\u003cp\u003eThe cutting disc has a 22.23 mm bore; it does not have an M14 screw thread.\u003c\/p\u003e\u003ch4\u003eIs Jolly Cut the same as Jolly Cup 14?\u003c\/h4\u003e\u003cp\u003eNo. Jolly Cut is the cutting disc, Jolly Cup 14 is a separate grinding disc for edge processing.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired specification and then the quantity of 1, 3 or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"1 piece","offer_id":55529283060053,"sku":"NOZ-JOLLYC-6720203-1","price":85.46,"currency_code":"EUR","in_stock":false},{"title":"3 pieces","offer_id":55529283092821,"sku":"NOZ-JOLLYC-6720203-3","price":247.83,"currency_code":"EUR","in_stock":false},{"title":"6 pieces","offer_id":55529283125589,"sku":"NOZ-JOLLYC-6720203-6","price":461.47,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-kuehlgel-fuer-trockenbohrer-und-fliesenbohrer-250-g","title":"Nozar Cooling Gel for Drywall Bits and Tile Bits, 250 g","description":"\u003ch2\u003eNozar Cooling Gel for Dry Core Bits and Tile Bits, 250 g\u003c\/h2\u003e\u003cp\u003eNozar cooling gel is offered as an accessory for dry core bits and tile bits. The handy tube contains 250 g and is designed for use with the specified drilling tools. The manufacturer describes the gel as helping to extend tool life and reduce dust generation during its intended use.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e250 g in a tube.\u003c\/li\u003e\n\n\u003cli\u003eDesigned for dry core bits and tile bits.\u003c\/li\u003e\n\n\u003cli\u003eManufacturer’s yield: approximately 20–25 holes.\u003c\/li\u003e\n\n\u003cli\u003eAccessory item 6360810 for easy reordering.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe gel supplements the drilling process. Follow the product information on the tube and the instructions for the drilling tool used for precise application and dosing. An aid designed for dry drilling does not constitute general approval for using water or other liquids with any electrical machine. When selecting the tool, the material, hole diameter, and machine mount remain the determining factors.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6360810\u003c\/td\u003e\n\n\u003ctd\u003eContents (g): 250; Packaging: Tube; Manufacturer’s yield: approx. 20–25 holes, depending on application\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Use\u003c\/h3\u003e\u003cp\u003eThe yield stated by the manufacturer is a guideline. Actual consumption depends on the hole diameter, material, and workflow. For quantity planning, therefore, not every hole should be drilled using the same amount of gel. The tube is available as a separate accessory; a drill bit or machine is not included. After opening, close and store the packaging as indicated.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhat is the package size?\u003c\/h4\u003e\u003cp\u003eOne tube contains 250 g of cooling gel.\u003c\/p\u003e\u003ch4\u003eHow many holes does one tube cover?\u003c\/h4\u003e\u003cp\u003eThe manufacturer states approximately 20–25 holes. The actual yield depends on the application.\u003c\/p\u003e\u003ch4\u003eDoes the gel replace the drill bit manufacturer’s specifications?\u003c\/h4\u003e\u003cp\u003eNo. Installation, speed, breaks, and use of the drilling tool must continue to comply with its instructions and markings.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"Default Title","offer_id":55529283354965,"sku":"NOZ-KUEHLG-6360810-1","price":16.12,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-laser-turbo-universal-diamant-trennscheibe-350-mm","title":"Nozar Laser Turbo Universal Diamond Cutting Disc 350 mm","description":"\u003ch2\u003eNozar Laser Turbo Universal Diamond Cutting Disc 350 mm\u003c\/h2\u003e\u003cp\u003eThe Nozar Laser Turbo Universal is a segmented diamond cutting disc from the Basic Line. The version listed here has an outer diameter of 350 mm and a 25.4 mm mounting hole. Its cutting edge consists of 24 segments, each measuring 40 × 3.2 × 10 mm. The metallic green marking and the manufacturer's part number 6702066 help to clearly identify it as a replacement or supplementary tool.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e350 mm disc diameter.\u003c\/li\u003e\n\n\u003cli\u003e25.4 mm mounting hole.\u003c\/li\u003e\n\n\u003cli\u003e24 segmented cutting elements.\u003c\/li\u003e\n\n\u003cli\u003eSegment dimensions 40 × 3.2 × 10 mm; part of the Nozar Basic Line.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe large disc size requires a cutting machine designed for this purpose. Before use, the specifications on the actual tool, the machine approval, and the material to be cut must match. When replacing an existing disc, the part number and full dimensions should also be checked. A similarly named series may have different segmentation or mounting.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer's part\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6702066\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 350; Hole (mm): 25.4; Number of segments: 24; Segment length (mm): 40; Segment width (mm): 3.2; Segment height (mm): 10.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThis version is different from the Laser Turbo-S-Cut and other Universal series. The series name alone does not provide a definitive statement about suitability for every type of material or for wet or dry use. The marking on the supplied tool and the instructions for the machine being used are decisive. The technical specifications on this product page refer exclusively to part 6702066.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhat mounting does this disc have?\u003c\/h4\u003e\u003cp\u003eIt has a 25.4 mm hole and a 350 mm outer diameter.\u003c\/p\u003e\u003ch4\u003eHow is the cutting edge constructed?\u003c\/h4\u003e\u003cp\u003eThe product description specifies 24 segments, each measuring 40 × 3.2 × 10 mm.\u003c\/p\u003e\u003ch4\u003eIs Laser Turbo Universal the same as Laser Turbo-S-Cut?\u003c\/h4\u003e\u003cp\u003eNo. They are separate series with their own part numbers and technical dimensions.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3, or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"1 piece","offer_id":55529283420501,"sku":"NOZ-LTUNI-6702066-1","price":92.47,"currency_code":"EUR","in_stock":false},{"title":"3 pieces","offer_id":55529283453269,"sku":"NOZ-LTUNI-6702066-3","price":268.15,"currency_code":"EUR","in_stock":false},{"title":"6 pieces","offer_id":55529283486037,"sku":"NOZ-LTUNI-6702066-6","price":499.32,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-laser-turbo-s-cut-diamant-trennscheibe","title":"Nozar Laser Turbo-S-Cut Diamond Cutting Disc","description":"\u003ch2\u003eNozar Laser Turbo-S-Cut Diamond Cutting Disc\u003c\/h2\u003e\u003cp\u003eThe Nozar Laser Turbo-S-Cut is a Profi Line diamond cutting disc for concrete and a wide range of mineral-based building materials. Its 10 mm high turbo coating is designed to reduce side friction during cutting. The range includes both compact disc sizes and larger versions for appropriately designed cutting machines. It is particularly suitable for cutting various common construction materials in everyday work.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor concrete, reinforced concrete, old concrete, and washed concrete.\u003c\/li\u003e\n\n\u003cli\u003eAlso for medium-hard clinker, medium-hard roof tiles, and general building materials.\u003c\/li\u003e\n\n\u003cli\u003e10 mm high turbo segments for fast cutting progress.\u003c\/li\u003e\n\n\u003cli\u003eProfi Line tool with a segmented design.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eFor renovation, new construction, and outdoor work, the range enables cutting of the concrete and building materials mentioned above. The choice of machine depends on the disc diameter and the mounting hole. A compact angle grinder version and a large disc for a saw designed for it are technically different variants; they must not be interchanged solely because they have the same range name.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6700051\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Hole (mm): 22.23; Number of segments: 10; Segment length (mm): 32; Segment width (mm): 2.2; Segment height (mm): 10.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6700054\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 230; Hole (mm): 22.23; Number of segments: 16; Segment length (mm): 38; Segment width (mm): 2.6; Segment height (mm): 10.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe 125 mm and 230 mm discs offered each have a 22.23 mm hole. The number of segments and segment dimensions vary with the diameter. Check the machine data and the intended building material before purchase. This version is designated Laser Turbo-S-Cut; the separate SDW range with a noise-reducing core is a different product.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eCan the disc cut reinforced concrete?\u003c\/h4\u003e\u003cp\u003eReinforced concrete is one of the applications listed in the manufacturer's catalog. The working method, protective measures, and machine must be coordinated with the component.\u003c\/p\u003e\u003ch4\u003eIs this disc an SDW version?\u003c\/h4\u003e\u003cp\u003eNo. The Laser Turbo-S-Cut described here is distinct from the separately offered SDW range.\u003c\/p\u003e\u003ch4\u003eAre the technical specifications the same for all sizes?\u003c\/h4\u003e\u003cp\u003eNo. The hole, number of segments, and segment dimensions must be checked according to the selected variant.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3, or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 22.23 mm \/ 1 piece","offer_id":55529283715413,"sku":"NOZ-TSCUT-125X22-23-6700051-1","price":22.96,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 3 pieces","offer_id":55529283748181,"sku":"NOZ-TSCUT-125X22-23-6700051-3","price":66.59,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 6 pieces","offer_id":55529283780949,"sku":"NOZ-TSCUT-125X22-23-6700051-6","price":124.0,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 1 piece","offer_id":55529283813717,"sku":"NOZ-TSCUT-230X22-23-6700054-1","price":48.36,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 3 pieces","offer_id":55529283846485,"sku":"NOZ-TSCUT-230X22-23-6700054-3","price":140.24,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 6 pieces","offer_id":55529283879253,"sku":"NOZ-TSCUT-230X22-23-6700054-6","price":261.13,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/0634\/4021\/files\/6700050.jpg?v=1793023442"},{"product_id":"nozar-metal-cut-diamant-trennscheibe-125-mm-fuer-metall","title":"Nozar Metal Cut Diamond Cutting Disc 125 mm for Metal","description":"\u003ch2\u003eNozar Metal Cut Diamond Cutting Disc 125 mm for Metal\u003c\/h2\u003e\u003cp\u003eThe Nozar Metal Cut is a thin diamond cutting disc for metalworking. The manufacturer lists steel, stainless steel, rebar, sheet metal, and non-ferrous metals as its main applications. With a diameter of 125 mm, a segment width of 1.2 mm, and a 22.23 mm bore, it is a compact version suitable for compatible angle grinders.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor cutting the aforementioned types of metal.\u003c\/li\u003e\n\n\u003cli\u003eSuitable for tasks on pipes, metal frames, bolts, anchors, and screws.\u003c\/li\u003e\n\n\u003cli\u003eThin diamond construction with a 1.2 mm working width.\u003c\/li\u003e\n\n\u003cli\u003eExpressly described for compatible cordless angle grinders.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe Metal Cut can be used when metal components need to be cut to length or separated. Before cutting, check the material type, workpiece fixation, and ambient conditions. The work must be carried out with a machine suitable for metal cutting and a protective guard. The product description does not replace the information on the maximum speed stated on the tool.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6720375\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Segment width (mm): 1.2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe disc differs in design from a bonded corundum disc. The manufacturer emphasizes that its diameter remains largely intact during use, thus making the design cutting depth available. An appropriate feed rate and straight guidance are important for a clean result. Occasional cuts in other materials are mentioned in the catalog; the main focus of this product remains metalworking.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs Metal Cut intended for stainless steel?\u003c\/h4\u003e\u003cp\u003eYes. Stainless steel is listed along with steel, rebar, sheet metal, and non-ferrous metals.\u003c\/p\u003e\u003ch4\u003eIs it a corundum disc?\u003c\/h4\u003e\u003cp\u003eNo. The Metal Cut is described as a diamond cutting disc.\u003c\/p\u003e\u003ch4\u003eCan I use it for surface grinding?\u003c\/h4\u003e\u003cp\u003eThe described application is cutting. For surface grinding work, use a tool specifically designed and approved for this purpose.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3, or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"1 piece","offer_id":55529283944789,"sku":"NOZ-METAL-6720375-1","price":27.67,"currency_code":"EUR","in_stock":false},{"title":"3 pieces","offer_id":55529283977557,"sku":"NOZ-METAL-6720375-3","price":80.26,"currency_code":"EUR","in_stock":false},{"title":"6 pieces","offer_id":55529284010325,"sku":"NOZ-METAL-6720375-6","price":149.44,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-panther-diamant-trennscheibe-125-mm-fuer-feinsteinzeug","title":"Nozar Panther Diamond Cutting Disc 125 mm for Porcelain Stoneware","description":"\u003ch2\u003eNozar Panther 125 mm Diamond Cutting Disc for Porcelain Stoneware\u003c\/h2\u003e\u003cp\u003eThe Nozar Panther is a diamond cutting disc for porcelain stoneware and ceramic tiles. Its 25 mm high coating features a special sandwich construction designed by the manufacturer for clean cut edges. The reinforced flange supports smooth running. The 125 mm version is suitable for compatible machines with a 22.23 mm mounting hole.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor porcelain stoneware and ceramic tiles.\u003c\/li\u003e\n\n\u003cli\u003eAlso described for precise cut edges on glazed tiles.\u003c\/li\u003e\n\n\u003cli\u003eClosed cutting edge with a 1.5 × 25 mm coating.\u003c\/li\u003e\n\n\u003cli\u003eReinforced flange and sandwich construction of the diamond coating.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe Panther is used for cutting tiles and creating suitable finishing dimensions. An appropriate feed rate and a stable workpiece support are important for a high-quality edge. A test cut helps to assess the behavior of a new or sensitive tile surface. The disc must be guided straight and must not be stressed by tilting.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Item\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6729883\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Hole (mm): 22.23; Segment width (mm): 1.5; Segment height (mm): 25.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe designation Panther identifies this specific series. It is not automatically interchangeable with another Nozar tool of the same size. Before mounting, check the diameter, mounting hole, and permissible speed. The coating height of 25 mm is a tool dimension and not an indication of the maximum possible cutting depth. The actual cutting depth depends on several factors, including the machine used.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhat is the special feature of the Panther coating?\u003c\/h4\u003e\u003cp\u003eThe manufacturer describes a sandwich construction for clean cut edges.\u003c\/p\u003e\u003ch4\u003eDoes a 25 mm coating mean a cutting depth of 25 mm?\u003c\/h4\u003e\u003cp\u003eNo. The specification refers to the height of the coating. The cutting depth is determined by the tool and machine together.\u003c\/p\u003e\u003ch4\u003eFor which materials is the disc intended?\u003c\/h4\u003e\u003cp\u003eFor porcelain stoneware and ceramic tiles, including the glazed tiles mentioned in the manufacturer's text.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3, or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"1 piece","offer_id":55529284338005,"sku":"NOZ-PANTHER-6729883-1","price":91.44,"currency_code":"EUR","in_stock":false},{"title":"3 pieces","offer_id":55529284370773,"sku":"NOZ-PANTHER-6729883-3","price":265.17,"currency_code":"EUR","in_stock":false},{"title":"6 pieces","offer_id":55529284403541,"sku":"NOZ-PANTHER-6729883-6","price":493.76,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-phoenix-diamant-trennscheibe-125-mm-1-1-mm","title":"Nozar Phoenix Diamond Cutting Disc 125 mm, 1.1 mm","description":"\u003ch2\u003eNozar Phoenix Diamond Cutting Disc 125 mm, 1.1 mm\u003c\/h2\u003e\u003cp\u003eThe Nozar Phoenix is a particularly narrow diamond cutting disc for porcelain stoneware and ceramic tiles. The 125 mm version has a cutting width of 1.1 mm and is designed for fine cut edges. The reinforced flange supports smooth operation. According to the manufacturer, the tool is equally suitable for compatible corded and cordless angle grinders.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDesigned for porcelain stoneware and ceramic tiles.\u003c\/li\u003e\n\n\u003cli\u003eNarrow cutting width of 1.1 mm.\u003c\/li\u003e\n\n\u003cli\u003eReinforced flange for stable operation.\u003c\/li\u003e\n\n\u003cli\u003eSeven segments in pressed segmentation.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe Phoenix is a suitable choice for cuts where the cut should be narrow and the edge as fine as possible. Glazed tiles are also included in the described area of application. A clean support and a uniform, appropriate feed rate are just as important as the tool. With new or sensitive coverings, first check on a piece of offcut how the material and surface glaze react.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Item\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6700900\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Number of segments: 7; Segment width (mm): 1.1\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe disc has a 22.23 mm mounting bore. Before ordering, compare the diameter and mounting with your angle grinder and pay attention to the tool marking. Cordless and corded machines each require approval for the mounted tool format. The thin version is intended for cutting work; it should not be subjected to lateral wedging or unintended grinding loads.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhat is special about the Phoenix?\u003c\/h4\u003e\u003cp\u003eThe cutting width is only 1.1 mm. Together with the reinforced flange, the design is intended for fine cuts in ceramic coverings.\u003c\/p\u003e\u003ch4\u003eIs the disc also suitable for a cordless angle grinder?\u003c\/h4\u003e\u003cp\u003eYes, the manufacturer lists cordless and corded angle grinders. However, the dimensions, mounting, and permissible operating data must still match.\u003c\/p\u003e\u003ch4\u003eCan it be used for glazed tiles?\u003c\/h4\u003e\u003cp\u003eGlazed tiles are expressly included in the manufacturer's text. A test cut remains sensible with sensitive surfaces.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3 or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price of this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"1 piece","offer_id":55529284600149,"sku":"NOZ-PHOENIX-6700900-1","price":60.92,"currency_code":"EUR","in_stock":false},{"title":"3 pieces","offer_id":55529284632917,"sku":"NOZ-PHOENIX-6700900-3","price":176.66,"currency_code":"EUR","in_stock":false},{"title":"6 pieces","offer_id":55529284665685,"sku":"NOZ-PHOENIX-6700900-6","price":328.96,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-powersprint-trenn-und-anfasscheibe-125-mm","title":"Nozar Powersprint 125 mm Cutting and Grinding Disc","description":"\u003ch2\u003eNozar Powersprint Cutting and Chamfering Disc 125 mm\u003c\/h2\u003e\u003cp\u003eThe Nozar Powersprint combines the cutting and chamfering of suitable pipes in a single operation. The diamond-impregnated disc measures 125 mm and is supplied with a 22.23 mm bore. Its range of applications includes orange KG pipes and grey HT pipes, as well as cast iron, clay and concrete pipes. It is aimed at users who want to process the pipe edge at the same time as cutting the pipe.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCutting and chamfering with the same tool.\u003c\/li\u003e\n\n\u003cli\u003eFor the KG, HT, cast iron, clay and concrete pipes listed in the manufacturer's catalogue.\u003c\/li\u003e\n\n\u003cli\u003eManufacturer's recommendation for pipe diameters up to 200 mm.\u003c\/li\u003e\n\n\u003cli\u003eDiamond-impregnated Powersprint version with a 125 mm outer diameter.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe pipe, machine and working position must be properly prepared. The Powersprint is used on a suitable one-handed angle grinder. For KG and HT pipes, the manufacturer's special application instructions must be observed: These pipes are processed against the cutting direction. Before use, the specific pipe quality must be checked, as plastic cannot automatically be equated with plastic.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer's item\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6700360\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Number of segments: 8\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eFor soft plastic pipes, Nozar states a limitation: The diamond coating can become clogged. The Powersprint 6700360 offered here is also to be distinguished from the carbide-impregnated Powersprint Plus 14. According to the catalogue, no separate depth stop is required for the Powersprint. Therefore, the accessory information for the Plus 14 version should not be transferred to this product without verification.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs this the Powersprint Plus 14?\u003c\/h4\u003e\u003cp\u003eNo. This diamond version has the item number 6700360. The Plus 14 has a different cutting coating and its own accessory instructions.\u003c\/p\u003e\u003ch4\u003eFor which pipe size is there a recommendation?\u003c\/h4\u003e\u003cp\u003eNozar recommends the Powersprint for pipes up to 200 mm in diameter.\u003c\/p\u003e\u003ch4\u003eIs every plastic suitable?\u003c\/h4\u003e\u003cp\u003eNo. Soft plastic pipes are only limitedly suitable because the coating can become clogged. Check the material and manufacturer's instructions in advance.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3 or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"1 piece","offer_id":55529284829525,"sku":"NOZ-PSPRINT-6700360-1","price":118.41,"currency_code":"EUR","in_stock":false},{"title":"3 pieces","offer_id":55529284862293,"sku":"NOZ-PSPRINT-6700360-3","price":343.39,"currency_code":"EUR","in_stock":false},{"title":"6 pieces","offer_id":55529284895061,"sku":"NOZ-PSPRINT-6700360-6","price":639.41,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-profi-diamant-fliesenbohrer-m14-fuer-trockenbohrungen","title":"Nozar Professional Diamond Tile Drill Bit M14 for Dry Drilling","description":"\u003ch2\u003eNozar Professional Diamond Tile Drill Bit M14 for Dry Drilling\u003c\/h2\u003e\u003cp\u003eThe Nozar Professional diamond tile drill bit with M14 mount is designed for dry drilling in tiles. The vacuum-brazed diamond coating forms the cutting area of the hollow drill bit. The gold-colored variants cover small mounting holes as well as larger openings. The selection is made according to the required drilling diameter and usable drilling depth.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eM14 mount for the suitable machine.\u003c\/li\u003e\n\n\u003cli\u003eVacuum-brazed diamond coating and design for dry drilling.\u003c\/li\u003e\n\n\u003cli\u003eDiameters from 6 to 14 mm with cooling wax and a specified drilling depth of 35 mm.\u003c\/li\u003e\n\n\u003cli\u003eLarger available diameters from 20 mm with a specified drilling depth of 45 mm.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eWhen drilling a tile, the surface material, required hole diameter, and subsequent installation purpose must be considered together. The M14 mount is not to be confused with a standard hex shank. The markings on the specific drill bit and the machine instructions apply to installation and permissible operating data. The workpiece must be placed stably or securely fastened during processing.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Item Number\u003c\/th\u003e\n\n\u003cth\u003eDesign\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6722001\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 6 mm; Mount: M14; Drilling depth: 35 mm; Cooling wax: included\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6722002\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 8 mm; Mount: M14; Drilling depth: 35 mm; Cooling wax: included\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6722003\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 10 mm; Mount: M14; Drilling depth: 35 mm; Cooling wax: included\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6722004\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 12 mm; Mount: M14; Drilling depth: 35 mm; Cooling wax: included\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6722005\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 14 mm; Mount: M14; Drilling depth: 35 mm; Cooling wax: included\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6722009\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 20 mm; Mount: M14; Drilling depth: 45 mm; Dry drill bit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6722016\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 35 mm; Mount: M14; Drilling depth: 45 mm; Dry drill bit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6722018\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 40 mm; Mount: M14; Drilling depth: 45 mm; Dry drill bit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6722029\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 68 mm; Mount: M14; Drilling depth: 45 mm; Dry drill bit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe Professional series with manufacturer item numbers 6722… is listed here as its own product family. It must not be equated with Nozar Premium M14 or Speed drill bits solely on the basis of the similar designation. For reordering, compare the item number, diameter, and drilling depth. Cooling wax is only part of the item data for the expressly stated small diameters; it is not included for larger diameters.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eDoes the drill bit fit in a normal drill chuck?\u003c\/h4\u003e\u003cp\u003eThe series described here has M14 threads. A hex or round shank is not part of this design.\u003c\/p\u003e\u003ch4\u003eWhich variants include cooling wax?\u003c\/h4\u003e\u003cp\u003eAccording to the manufacturer's listing data, the available sizes are 6, 8, 10, 12, and 14 mm.\u003c\/p\u003e\u003ch4\u003eHow deep can it be drilled?\u003c\/h4\u003e\u003cp\u003eFor the available 6–14 mm variants, 35 mm is specified, and for 20–68 mm, 45 mm. The respective item specification is decisive.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"6 mm","offer_id":55529285091669,"sku":"NOZ-FBPRO-6MM-6722001-1","price":26.05,"currency_code":"EUR","in_stock":false},{"title":"8 mm","offer_id":55529285124437,"sku":"NOZ-FBPRO-8MM-6722002-1","price":26.87,"currency_code":"EUR","in_stock":false},{"title":"10 mm","offer_id":55529285157205,"sku":"NOZ-FBPRO-10MM-6722003-1","price":29.47,"currency_code":"EUR","in_stock":false},{"title":"12 mm","offer_id":55529285189973,"sku":"NOZ-FBPRO-12MM-6722004-1","price":32.15,"currency_code":"EUR","in_stock":false},{"title":"14 mm","offer_id":55529285222741,"sku":"NOZ-FBPRO-14MM-6722005-1","price":34.1,"currency_code":"EUR","in_stock":false},{"title":"20 mm","offer_id":55529285255509,"sku":"NOZ-FBPRO-20MM-6722009-1","price":39.31,"currency_code":"EUR","in_stock":false},{"title":"35 mm","offer_id":55529285288277,"sku":"NOZ-FBPRO-35MM-6722016-1","price":56.82,"currency_code":"EUR","in_stock":false},{"title":"40 mm","offer_id":55529285321045,"sku":"NOZ-FBPRO-40MM-6722018-1","price":70.09,"currency_code":"EUR","in_stock":false},{"title":"68 mm","offer_id":55529285353813,"sku":"NOZ-FBPRO-68MM-6722029-1","price":111.11,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-rip-cut-hartmetall-trennscheibe","title":"Nozar RIP CUT Carbide Cutting Disc","description":"\u003ch2\u003eNozar RIP CUT Carbide Cutting Disc\u003c\/h2\u003e\u003cp\u003eThe Nozar RIP CUT is a carbide-tipped cutting disc for heavy-duty cutting and demolition work. It is suitable for wood, including nails and screws, branches and roots, as well as other materials listed in the catalogue. Its robust, coarse-cutting design differs significantly from a fine diamond disc for ceramic tiles.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCarbide-tipped with tungsten carbide bond.\u003c\/li\u003e\n\n\u003cli\u003eFor wood, branches and roots, including those in the ground.\u003c\/li\u003e\n\n\u003cli\u003eOther applications: hard plastics, hard rubber, bitumen membranes, roofing felt, as well as thin sheet metal and aluminium.\u003c\/li\u003e\n\n\u003cli\u003eWide, coarse-cutting segments; designed for demolition and dismantling tasks.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe range is aimed at gardeners and landscapers, roofers and carpenters, among others. It can be selected for cutting suitable wooden components, fence posts, roofing materials or plastic parts. The cut produced is functional and coarse; a different tool is required for visible edges in furniture making or fine tile cutting. The work area and workpiece must be securely fixed or prepared.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6702164\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 230; Bore (mm): 22.23; Number of segments: 20; Segment length (mm): 20; Segment width (mm): 6.0; Segment height (mm): 10.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6702167\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 300; Bore (mm): 25.4; Number of segments: 30; Segment length (mm): 20; Segment width (mm): 6.0; Segment height (mm): 10.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6702169\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 350; Bore (mm): 25.4; Number of segments: 30; Segment length (mm): 20; Segment width (mm): 6.0; Segment height (mm): 10.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe available variants include 230, 300 and 350 mm. The bore and number of segments differ. A matching product name does not imply general machine approval. Only machines and safety devices expressly suitable should be used, especially for woodworking. The direction of rotation and all installation instructions specified on the tool are binding.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs RIP CUT a diamond cutting disc?\u003c\/h4\u003e\u003cp\u003eNo. The cutting elements are carbide-tipped.\u003c\/p\u003e\u003ch4\u003eCan wood with nails or screws be processed?\u003c\/h4\u003e\u003cp\u003eThe manufacturer lists this application. A suitable machine, secure fixing and controlled working method remain necessary.\u003c\/p\u003e\u003ch4\u003eIs the disc intended for fine visible edges?\u003c\/h4\u003e\u003cp\u003eRIP CUT produces a coarse cut and is specifically designed for cutting, demolition and dismantling work.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired specification and then the quantity of 1, 3 or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"230 × 22.23 mm \/ 1 piece","offer_id":55529285648725,"sku":"NOZ-RIPCUT-230X22-23-6702164-1","price":167.2,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 3 pieces","offer_id":55529285681493,"sku":"NOZ-RIPCUT-230X22-23-6702164-3","price":484.87,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 6 pieces","offer_id":55529285714261,"sku":"NOZ-RIPCUT-230X22-23-6702164-6","price":902.86,"currency_code":"EUR","in_stock":false},{"title":"300 × 25.4 mm \/ 1 piece","offer_id":55529285747029,"sku":"NOZ-RIPCUT-300X25-4-6702167-1","price":265.68,"currency_code":"EUR","in_stock":false},{"title":"300 × 25.4 mm \/ 3 pieces","offer_id":55529285779797,"sku":"NOZ-RIPCUT-300X25-4-6702167-3","price":770.46,"currency_code":"EUR","in_stock":false},{"title":"300 × 25.4 mm \/ 6 pieces","offer_id":55529285812565,"sku":"NOZ-RIPCUT-300X25-4-6702167-6","price":1434.65,"currency_code":"EUR","in_stock":false},{"title":"350 × 25.4 mm \/ 1 piece","offer_id":55529285845333,"sku":"NOZ-RIPCUT-350X25-4-6702169-1","price":300.84,"currency_code":"EUR","in_stock":false},{"title":"350 × 25.4 mm \/ 3 pieces","offer_id":55529285878101,"sku":"NOZ-RIPCUT-350X25-4-6702169-3","price":872.43,"currency_code":"EUR","in_stock":false},{"title":"350 × 25.4 mm \/ 6 pieces","offer_id":55529285910869,"sku":"NOZ-RIPCUT-350X25-4-6702169-6","price":1624.53,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/0634\/4021\/files\/rip-cut-230-label.jpg?v=1793023449"},{"product_id":"nozar-red-devil-fliese-diamant-trennscheibe","title":"Nozar Red Devil Fliese Diamond Cutting Disc","description":"\u003ch2\u003eNozar Red Devil Fliese Diamond Cutting Disc\u003c\/h2\u003e\u003cp\u003eThe Nozar Red Devil Fliese is a Premium Line diamond cutting disc for hard ceramic tiles. It is designed specifically for fired ceramic, ceramic patio slabs, and ceramic composite slabs. The narrow, closed turbo edge works together with a reinforced flange to support controlled cutting on demanding slab materials.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor ceramic patio slabs and ceramic composite slabs.\u003c\/li\u003e\n\n\u003cli\u003eAlso for hard porcelain stoneware, granite slabs, artificial stone tiles, ceramic, terracotta, and marble.\u003c\/li\u003e\n\n\u003cli\u003e7 mm tile height with variant-dependent segment width.\u003c\/li\u003e\n\n\u003cli\u003eReinforced flange and closed turbo edge.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe series is suitable for cutting when installing hard tiles indoors and outdoors. For ceramic composite slabs, the entire slab construction must be taken into account. Place the workpiece securely and adjust the feed rate to the material and machine. For visible cut edges, a test cut on a new batch of slabs is recommended to assess the actual cut appearance.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Item\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6702101\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Segment width (mm): 1.2; Segment height (mm): 7.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6702105\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 230; Bore (mm): 22.23; Segment width (mm): 1.6; Segment height (mm): 7.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe 125 mm version has a segment width of 1.2 mm, while the 230 mm version has 1.6 mm. Both sizes offered have a 22.23 mm mounting bore. The designation Red Devil Fliese is deliberately distinguished from the other Nozar Red Devil product for roofing and construction site materials. Before selecting, check both the Fliese suffix and the full variant designation.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs Red Devil Fliese suitable for ceramic patio tiles?\u003c\/h4\u003e\u003cp\u003eYes. Ceramic patio slabs and fired ceramic are expressly stated applications.\u003c\/p\u003e\u003ch4\u003eIs the cut width the same for 125 and 230 mm?\u003c\/h4\u003e\u003cp\u003eNo. It is 1.2 mm for 125 mm and 1.6 mm for 230 mm.\u003c\/p\u003e\u003ch4\u003eIs it the same disc as Red Devil without the Fliese suffix?\u003c\/h4\u003e\u003cp\u003eNo. The full series designation and the item number are decisive for selection.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3, or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 22.23 mm \/ 1 piece","offer_id":55529285976405,"sku":"NOZ-REDDEV-125X22-23-6702101-1","price":67.64,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 3 pieces","offer_id":55529286009173,"sku":"NOZ-REDDEV-125X22-23-6702101-3","price":196.14,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 6 pieces","offer_id":55529286041941,"sku":"NOZ-REDDEV-125X22-23-6702101-6","price":365.23,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 1 piece","offer_id":55529286074709,"sku":"NOZ-REDDEV-230X22-23-6702105-1","price":108.51,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 3 pieces","offer_id":55529286107477,"sku":"NOZ-REDDEV-230X22-23-6702105-3","price":314.66,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 6 pieces","offer_id":55529286140245,"sku":"NOZ-REDDEV-230X22-23-6702105-6","price":585.93,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-roof-top-diamant-trennscheibe-fuer-dachpfannen","title":"Nozar Roof Top Diamond Cutting Disc for Roof Tiles","description":"\u003ch2\u003eNozar Roof Top Diamond Cutting Disc for Roof Tiles\u003c\/h2\u003e\u003cp\u003eThe Nozar Roof Top is a diamond cutting disc for roofers and the processing of suitable hard building materials. Its construction features a closed cutting edge, reinforced flange and a perforated core. The manufacturer rates the series for precise cuts and clean edges on roof tiles as well as other mineral building components.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor concrete and clay roof tiles, including glazed and Frankfurter roof tiles.\u003c\/li\u003e\n\n\u003cli\u003eOther applications: granite, concrete, old concrete, hard clinker, stoneware and concrete pipes.\u003c\/li\u003e\n\n\u003cli\u003e12 mm coating height.\u003c\/li\u003e\n\n\u003cli\u003eClosed cutting edge, reinforced flange and perforated core.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe disc is suitable for cutting to size and adjustments on the listed roofing and construction site materials. Especially with glazed surfaces, the cut should first be tested on a sample piece. Position and secure the workpiece so that it does not tilt or jam the disc during cutting. Suitable dust extraction and work equipment for the task should be planned.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Item\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6720351\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Segment width (mm): 2.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6720355\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 230; Bore (mm): 22.23; Segment width (mm): 2.4; Segment height (mm): 12.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe available sizes 125 and 230 mm have a 22.23 mm bore. The segment width is 2.0 or 2.4 mm respectively. Larger diameters in the series have their own mountings and can only be used with suitable machines. Roof Top is to be distinguished from the Roof Fine product, which is described for other tasks and a different cutting range.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eCan Roof Top cut glazed roof tiles?\u003c\/h4\u003e\u003cp\u003eYes. Glazed roof tiles belong to the material range mentioned in the catalog.\u003c\/p\u003e\u003ch4\u003eWhich size is the right one?\u003c\/h4\u003e\u003cp\u003eThe machine determines the permissible diameter and the mounting. After that, the required cutting depth and handling are considered.\u003c\/p\u003e\u003ch4\u003eAre Roof Top and Roof Fine identical?\u003c\/h4\u003e\u003cp\u003eNo. They are different series. For product selection, compare the full designation and item number.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3 or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price of this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 22.23 mm \/ 1 piece","offer_id":55529286336853,"sku":"NOZ-ROOF-125X22-23-6720351-1","price":37.53,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 3 pieces","offer_id":55529286369621,"sku":"NOZ-ROOF-125X22-23-6720351-3","price":108.83,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 6 pieces","offer_id":55529286402389,"sku":"NOZ-ROOF-125X22-23-6720351-6","price":202.65,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 1 piece","offer_id":55529286435157,"sku":"NOZ-ROOF-230X22-23-6720355-1","price":75.06,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 3 pieces","offer_id":55529286467925,"sku":"NOZ-ROOF-230X22-23-6720355-3","price":217.66,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 6 pieces","offer_id":55529286500693,"sku":"NOZ-ROOF-230X22-23-6720355-6","price":405.3,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-spezial-diamant-trennscheibe-fuer-beton-und-naturstein","title":"Nozar Special Diamond Cutting Disc for Concrete and Natural Stone","description":"\u003ch2\u003eNozar Spezial Diamond Cutting Disc for Concrete and Natural Stone\u003c\/h2\u003e\u003cp\u003eThe Nozar Spezial combines a 12 mm high diamond coating with short segmentation. This Profi-Line tool is designed for garden and landscape construction as well as for cutting various hard mineral building materials. The perforated core helps dissipate heat and cutting dust. This makes the range a practical choice for work sites where paving, concrete, and natural stone are used interchangeably.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFor granite, hard rock, paving stones, concrete, and reinforced concrete.\u003c\/li\u003e\n\n\u003cli\u003eOther applications: old concrete, washed concrete, medium-hard brick and clinker, and hard limestone.\u003c\/li\u003e\n\n\u003cli\u003eShort-tooth design with 12 mm high segments.\u003c\/li\u003e\n\n\u003cli\u003ePerforated core and laser-welded design according to the product data.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe Spezial is suitable, for example, for trimming paving areas, cutting concrete components, and working suitable natural stones. The material, machine mount, and permitted diameter are all important factors when selecting the tool. Larger versions are intended for appropriately sized cutting machines. Controlled feed helps maintain the cut path; avoid side wedging.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6700101\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Bore (mm): 22.23; Number of segments: 14; Segment length (mm): 20; Segment width (mm): 2.3; Segment height (mm): 12.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6700104\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 230; Bore (mm): 22.23; Number of segments: 26; Segment length (mm): 20; Segment width (mm): 2.6; Segment height (mm): 12.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6700116\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 350; Bore (mm): 25.4; Number of segments: 40; Segment length (mm): 20; Segment width (mm): 3.2; Segment height (mm): 12.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe 125 and 230 mm versions have a 22.23 mm bore; the available 350 mm version has a 25.4 mm bore. The segment width increases with larger sizes. Therefore, check the full size specifications rather than just the product name. The standard Spezial is not automatically equivalent to a noise-reduced Silentcut version.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhat is the Spezial suitable for in garden and landscape construction?\u003c\/h4\u003e\u003cp\u003eThe manufacturer lists paving stones, granite, concrete, reinforced concrete, and hard limestone, among others.\u003c\/p\u003e\u003ch4\u003eWhat mount do I need?\u003c\/h4\u003e\u003cp\u003eThe available 125 and 230 mm versions have a 22.23 mm bore; the 350 mm version is offered here with a 25.4 mm bore.\u003c\/p\u003e\u003ch4\u003eIs a larger diameter always better?\u003c\/h4\u003e\u003cp\u003eIt must fit the machine and the required cutting depth. A larger disc must not be mounted on an unsuitable machine.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3, or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 22.23 mm \/ 1 piece","offer_id":55529286664533,"sku":"NOZ-SPEZ-125X22-23-6700101-1","price":38.83,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 3 pieces","offer_id":55529286697301,"sku":"NOZ-SPEZ-125X22-23-6700101-3","price":112.61,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 6 pieces","offer_id":55529286730069,"sku":"NOZ-SPEZ-125X22-23-6700101-6","price":209.68,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 1 piece","offer_id":55529286762837,"sku":"NOZ-SPEZ-230X22-23-6700104-1","price":77.66,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 3 pieces","offer_id":55529286795605,"sku":"NOZ-SPEZ-230X22-23-6700104-3","price":225.22,"currency_code":"EUR","in_stock":false},{"title":"230 × 22.23 mm \/ 6 pieces","offer_id":55529286828373,"sku":"NOZ-SPEZ-230X22-23-6700104-6","price":419.37,"currency_code":"EUR","in_stock":false},{"title":"350 × 25.4 mm \/ 1 piece","offer_id":55529286861141,"sku":"NOZ-SPEZ-350X25-4-6700116-1","price":151.64,"currency_code":"EUR","in_stock":false},{"title":"350 × 25.4 mm \/ 3 pieces","offer_id":55529286893909,"sku":"NOZ-SPEZ-350X25-4-6700116-3","price":439.75,"currency_code":"EUR","in_stock":false},{"title":"350 × 25.4 mm \/ 6 pieces","offer_id":55529286926677,"sku":"NOZ-SPEZ-350X25-4-6700116-6","price":818.84,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/0634\/4021\/files\/6700100.jpg?v=1793023452"},{"product_id":"nozar-taifun-diamant-faecherscheibe-115-mm-m14","title":"Nozar Taifun Diamond Trephine Cup 115 mm M14","description":"\u003ch2\u003eNozar Taifun Diamond Fan Disc 115 mm M14\u003c\/h2\u003e\u003cp\u003eThe Nozar Taifun is a diamond fan grinding disc for the dry processing of granite, marble, artificial stone, and ceramic. Its design combines 50 diamond segments with 50 supporting SiCa segments. The movable segment structure supports uniform surface processing and can also be used for grinding chamfers.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e115 mm diameter with M14 mount.\u003c\/li\u003e\n\n\u003cli\u003e50 diamond segments and 50 SiCa support segments.\u003c\/li\u003e\n\n\u003cli\u003eFor dry grinding of granite, marble, artificial stone, and ceramic.\u003c\/li\u003e\n\n\u003cli\u003eGrit sizes with unique color coding and assigned processing step.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe Taifun is suitable for post-cutting rework of surfaces and edges. The manufacturer recommends a speed in the range of 6,000 to 8,000 rpm. This operating range is to be distinguished from the maximum permissible speed; the marking on the tool remains binding. For sensitive workpieces, first check in an inconspicuous place what surface the selected grit produces.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Item\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6720390\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 115 mm; Mount: M14; K60 (Coarse grinding) \/ green\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e6720391\u003c\/td\u003e\n\n\u003ctd\u003eDiameter: 115 mm; Mount: M14; K120 (Medium grinding) \/ black\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eGrit 60 is green and intended for coarse grinding, grit 120 is black and for medium grinding. Finer versions of the series serve further processing steps. The offer refers to a single selected fan disc. A set with multiple grits or additional cutting discs is a separate product. Check the suitable M14 mount and sufficiently adjustable machine speed in advance.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs the Taifun used wet or dry?\u003c\/h4\u003e\u003cp\u003eThe manufacturer describes it for dry grinding.\u003c\/p\u003e\u003ch4\u003eWhat speed is recommended?\u003c\/h4\u003e\u003cp\u003eNozar recommends 6,000 to 8,000 rpm. In addition, the maximum permissible speed on the tool must be observed.\u003c\/p\u003e\u003ch4\u003eWhich grit do I need?\u003c\/h4\u003e\u003cp\u003eGrit 60 is used for coarse grinding, grit 120 for medium grinding. For finer surfaces, correspondingly finer processing steps should be planned.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"K60","offer_id":55529287057749,"sku":"NOZ-TAIFUN-K60-6720390-1","price":64.11,"currency_code":"EUR","in_stock":false},{"title":"K120","offer_id":55529287090517,"sku":"NOZ-TAIFUN-K120-6720391-1","price":64.11,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-taifun-viper-schneid-und-schleifset-5-teilig","title":"Nozar Taifun\/Viper Cutting and Grinding Set, 5-piece","description":"\u003ch2\u003eNozar Taifun\/Viper Cutting and Grinding Set, 5-piece\u003c\/h2\u003e\u003cp\u003eThe five-piece Nozar Taifun\/Viper set combines tools for cutting and subsequent edge processing. Three Taifun diamond fan discs cover successive grinding steps. Two Fliese-Viper diamond cutting discs complete the set for cutting suitable ceramic tiles. This provides a clearly defined combination of different working tools.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eOne Taifun fan disc each in grit 60, 120 and 200.\u003c\/li\u003e\n\n\u003cli\u003eTaifun dimensions 115 mm each with M14 mount.\u003c\/li\u003e\n\n\u003cli\u003eTwo Fliese-Viper cutting discs 125 × 22.23 mm.\u003c\/li\u003e\n\n\u003cli\u003eFive tools with clearly separated tasks for cutting and grinding.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe Viper discs are designed for cutting hard ceramic tiles and suitable natural stone tiles. The Taifun fan discs are used for dry grinding granite, marble, artificial stone and ceramic. When processing edges, the level of finish can be graded using the different grits: grit 60 for coarse grinding, grit 120 for medium grinding and grit 200 for smooth grinding. The sequence is selected based on the initial condition and desired surface of the workpiece.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6729815\u003c\/td\u003e\n\n\u003ctd\u003eTaifun:115mm\/M14;1 × each K60,K120,K200; Viper:2 ×125 ×22.23mm; Contents:5 tools\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThe mounts of the set components differ: Taifun uses M14, Viper uses a 22.23 mm bore. Therefore, every tool change must be carried out according to the machine instructions. For Taifun, the manufacturer specifies 6,000–8,000 rpm as the recommended operating range; this recommendation cannot be applied generally to the Viper. The marking on each tool remains decisive. Machines are not part of the described set.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eHow many cutting discs does the set contain?\u003c\/h4\u003e\u003cp\u003eTwo Fliese-Viper cutting discs with a diameter of 125 mm and a 22.23 mm bore.\u003c\/p\u003e\u003ch4\u003eWhich grinding grits are included?\u003c\/h4\u003e\u003cp\u003eOne Taifun fan disc each in grit 60, 120 and 200.\u003c\/p\u003e\u003ch4\u003eDo all tools have the same mount?\u003c\/h4\u003e\u003cp\u003eNo. The Taifun fan discs have an M14 mount, the Viper cutting discs have a 22.23 mm bore.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"Default Title","offer_id":55529287319893,"sku":"NOZ-TAIFSET-6729815-1","price":258.84,"currency_code":"EUR","in_stock":false}]},{"product_id":"nozar-wood-cut-accu-hartmetall-trennscheibe","title":"Nozar Wood Cut Accu Hard Metal Cutting Disc","description":"\u003ch2\u003eNozar Wood Cut Accu Carbide-Tipped Cutting Disc\u003c\/h2\u003e\u003cp\u003eThe Nozar Wood Cut Accu is a thin, carbide-tipped cutting disc for suitable interior finishing work. The manufacturer lists wood, laminate, vinyl, plywood, plastics and twin-wall sheets as suitable applications. The 125 mm version has a cut width of 1.2 mm and twelve cutting segments. It is described as suitable for compatible cordless and corded angle grinders.\u003c\/p\u003e\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCarbide-tipped cutting segments.\u003c\/li\u003e\n\n\u003cli\u003eNarrow cut with a width of 1.2 mm.\u003c\/li\u003e\n\n\u003cli\u003eFor wood and various panel and plastic materials used in interior finishing.\u003c\/li\u003e\n\n\u003cli\u003e125 mm diameter with a 22.23 mm mounting hole.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe Wood Cut Accu can be used for trimming suitable components, provided that the machine is expressly suitable for the tool and the material being processed. Securely fasten the workpiece and mark out the cut path beforehand. Wood and panel materials differ in construction; therefore, material thickness and coating should be checked before starting work. A narrow cut is no substitute for safe work guidance.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\n\u003cth\u003eVersion\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\u003ctr\u003e\n\n\u003ctd\u003e6702398\u003c\/td\u003e\n\n\u003ctd\u003eDiameter (mm): 125; Hole (mm): 22.23; Number of segments: 12; Segment width (mm): 1.2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eSelection and Processing\u003c\/h3\u003e\u003cp\u003eThis offer describes the individual disc. A door frame set with a flush-mount flange is a separate product and is not automatically included in the scope of delivery. Select the version according to machine size and mount.\u003c\/p\u003e\u003cp\u003eThe designation Accu indicates suitability for compatible cordless machines as stated in the manufacturer's catalogue; it makes no statement regarding a specific battery platform.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs the Wood Cut Accu a diamond disc?\u003c\/h4\u003e\u003cp\u003eNo. Its cutting segments are tipped with carbide.\u003c\/p\u003e\u003ch4\u003eIs a flush-mount flange included?\u003c\/h4\u003e\u003cp\u003eThis individual disc is not described as part of a door frame set with a flush-mount flange. Such a set is sold separately.\u003c\/p\u003e\u003ch4\u003eCan the disc be used on any angle grinder?\u003c\/h4\u003e\u003cp\u003eThe dimensions and operating data must be suitable, as must the approval for the specific material being processed. The machine instructions must be observed.\u003c\/p\u003e\u003ch3\u003eOrder Quantity and Scope of Delivery\u003c\/h3\u003e\u003cp\u003eSelect the desired version and then the quantity of 1, 3 or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.\u003c\/p\u003e","brand":"NOZAR","offers":[{"title":"125 × 22.23 mm \/ 1 piece","offer_id":55529287549269,"sku":"NOZ-WOOD-125X22-23-6702398-1","price":29.3,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 3 pieces","offer_id":55529287582037,"sku":"NOZ-WOOD-125X22-23-6702398-3","price":84.98,"currency_code":"EUR","in_stock":false},{"title":"125 × 22.23 mm \/ 6 pieces","offer_id":55529287614805,"sku":"NOZ-WOOD-125X22-23-6702398-6","price":158.23,"currency_code":"EUR","in_stock":false}]}],"url":"https:\/\/www.bauwolke24.de\/en\/collections\/nozar-diamantwerkzeuge.oembed","provider":"Bauwolke24","version":"1.0","type":"link"}