beko® PERI-Foam 750ml for NBS gun
beko® PERI-Foam 750ml for NBS gun
Low stock: 4 left
Herstellerinformationen
beko
beko GmbH
Rappenfeldstraße 5
86653 Monheim
Tel. +49 9091 90898 0
Fax. +49 9091 90898 29
Mail: info@beko-group.com
Gefahren- und Sicherheitshinweise
Signalwort:
Danger
Produktidentifikator:
Diphenylmethane diisocyanate, isomers and homologues
Gefahrenhinweise (H-Sätze):
H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated.
H332 Harmful if inhaled.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H317 May cause an allergic skin reaction.
H351 Suspected of causing cancer.
H335 May cause respiratory irritation.
H373 May cause damage to organs through prolonged or repeated exposure.
EUH204 Contains isocyanates. May produce an allergic reaction.
Sicherheitshinweise (P-Sätze):
P102 Keep out of reach of children.
P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe vapour/aerosol.
P280 Wear protective gloves/protective clothing/eye protection.
P284 In case of inadequate ventilation wear respiratory protection (protective mask with appropriate gas filter (Type A1 according to EN 14387)).
P302+P352 IF ON SKIN: Wash with plenty of water/soap.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Couldn't load pickup availability
beko PERI-Foam 750 ml – PU foam for NBS gun
beko PERI-Foam is a high-quality 1-component polyurethane foam for use with an NBS gun. The foam is particularly suitable for bonding perimeter insulation, insulation and drainage elements, as well as for foaming connection joints, insulating and filling cavities.
PERI-Foam is solvent-free, age-resistant, moisture-curing, and has a fine-pored cell structure. It is structurally sound, dimensionally stable, and meets DIN 4102 B2 quality. The yield is approx. 42 liters according to the manufacturer and is sufficient for approx. 15 m² of wall surface.
Processing with the NBS gun allows for optimal dosing and clean application of the foam. It cures quickly, is cuttable after approx. 30 minutes, and can be plastered and painted over after curing.
Your advantages at a glance
- 1-component polyurethane foam
- For use with NBS gun
- DIN 4102 B2 quality
- Yield approx. 42 liters
- Sufficient for approx. 15 m² of wall surface
- Solvent-free
- Age-resistant
- Moisture-curing
- Fine-pored cell structure
- Structurally sound and dimensionally stable
- Age and fungus resistant
- Can be plastered and painted over
Processing advantages
- Good adhesion to concrete and bituminous substrates
- Optimal dosing with NBS gun
- Clean application
- Fast curing
- Cuttable after approx. 30 minutes
- Universally applicable
Areas of application
- Bonding of perimeter insulation
- Bonding of insulation and drainage elements
- Foaming of connection joints
- Insulating cavities
- Filling cavities
- Assembly work with PU foam
- Insulation work in building and perimeter areas
Possible restrictions / notes
- Process only with a suitable NBS foam gun.
- Before processing, observe the manufacturer's instructions and safety information.
- PU foam may contain isocyanates; use appropriate protective equipment.
- Substrates should be load-bearing, clean, and free of loose particles.
- Remove fresh foam splashes immediately with a suitable PU cleaner.
- Cured PU foam can generally only be removed mechanically.
- Can is under pressure; protect from heat, direct sunlight, and open flames.
Processing instructions
Before processing, the substrates must be load-bearing, clean, and free of loose particles. Prepare the can according to the manufacturer's instructions and shake thoroughly before use.
Screw the can onto a suitable NBS foam gun and apply the foam evenly. When bonding perimeter insulation and insulation and drainage elements, apply the foam according to the assembly instructions and position the components.
PERI-Foam can be processed from +5 °C, optimally at approx. +20 °C and 60 % relative humidity. The foam is cuttable after approx. 30 minutes. Fresh foam splashes should be removed immediately with a suitable PU cleaner.
Technical data
| Product | beko PERI-Foam for NBS gun |
| Manufacturer item number | 280 755 |
| Content | 750 ml |
| Manufacturer packaging unit | 12 pcs. |
| Shop packaging units | 1 can, 6 cans or 12 pieces = 1 PU depending on selection |
| Basis | Polyurethane prepolymer, moisture-curing |
| Yield | approx. 42 liters yield at +20 °C, free-foamed |
| Surface coverage | sufficient for approx. 15 m² of wall surface |
| Building material class | DIN 4102 B2 quality |
| Cuttable | after approx. 30 minutes |
| Temperature resistance | from -40 °C to +90 °C, short-term up to +130 °C in cured state |
| Processing temperature | from +5 °C, optimal +20 °C at 60 % relative humidity |
| Thermal conductivity | 0.04 W/mK |
| Water absorption | 0.3 vol.-% after 24 hours |
| Storage | from +5 °C to +30 °C, dry |
| Shelf life | 12 months at +20 °C |
Variants & SKUs
| Quantity | Manufacturer item number | EAN | Weight approx. | SKU |
| 1 can | 280 755 | please check | 1000 g | BEKO-PERI-280-755-1 |
| 6 cans | 280 755 | please check | 6000 g | BEKO-PERI-280-755-6 |
| 12 pieces = 1 PU | 280 755 | please check | 12000 g | BEKO-PERI-280-755-12-VE |
Recommended variant structure for Shopify
| Option | Name | Values |
| Option1 | Quantity | 1 can, 6 cans, 12 pieces = 1 PU |
Scope of delivery
- Depending on selection: 1 x, 6 x or 12 x beko PERI-Foam for NBS gun 750 ml
Frequently Asked Questions
What is beko PERI-Foam suitable for?
PERI-Foam is suitable for bonding perimeter insulation, insulation and drainage elements, as well as for foaming connection joints, insulating and filling cavities.
Do I need a gun for PERI-Foam?
Yes, PERI-Foam is intended for use with an NBS foam gun.
What is the yield?
The yield is approx. 42 liters according to the manufacturer and is sufficient for approx. 15 m² of wall surface.
When can the foam be cut?
According to the manufacturer, the foam can be cut after approx. 30 minutes.
Can the foam be plastered or painted over?
Yes, the cured foam can be plastered and painted over.
What packaging units are available?
Since the manufacturer's packaging unit is 12 pieces, we offer the item as 1 can, 6 cans, or 12 pieces = 1 PU, depending on your selection.
Brand notice / Manufacturer
Brand product of beko GmbH. Sold via Bauwolke24.
beko GmbH
Rappenfeldstraße 5
86653 Monheim
Germany
Tel. +49 9091 90898 0
Fax. +49 9091 90898 29
Mail: info@beko-group.com
