Sikagard-715 W – Greenery Cleaner

Sikagard-715 W

Ready-to-use, water-based cleaner for the residue-free mechanical removal of green growth as well as organic and other soiling on interior and exterior building surfaces. The following description summarizes the most important manufacturer information for selection and application in a practical manner.

Advantages

• Excellent cleaning effect on smooth and porous surfaces
• Good penetration
• Free from organic solvents
• Phosphate-free
• No release of harmful or irritating vapors according to SIKA
• Can be used on many substrates such as masonry, natural stone, concrete, wood, steel, plastic, rubber and painted surfaces
• No biocide according to the directive stated by SIKA

Areas of application

• Roofs, gutters, facades and walls
• Terraces, porches, balconies and floors
• Wood and plastic surfaces
• Window frames, awnings and parasols
• Decorative stonework and gravestones

Technical data

• Chemical basis: water-based liquid with non-ionic surfactants, silicates and sequestering agents
• Density: approx. 1.01 g/cm³ at +20 °C
• pH value: approx. 11.5
• Shelf life: 24 months
• Storage temperature: +5 °C to +25 °C
• Application at air temperature > +5 °C
• Coverage: approx. 10–13 m²/l
• Packaging: 5 l canister; pack of 4

Certifications & tests

• Meets the European regulations for detergents No. 648/2004 according to SIKA

Application & substrate

• Use the product ready-to-use and do not dilute.
• Apply evenly and thoroughly with a brush, roller or low-pressure hand sprayer.
• After approx. 5–10 minutes of dwell time, rinse thoroughly with water; repeat application for stubborn soiling.

To note / possible disadvantages

• Cleaning is mechanically assisted – the product is not a biocide.
• Test on an inconspicuous area before large-scale application on sensitive or unknown surfaces.
• Protect from frost.

FAQ

Which variant is suitable?
Color and packaging are selected separately. For packaged goods, individual containers, half packs and full packs are available for selection – where provided.

Does it need to be primed?
This depends on Sikagard-715 W, the substrate and the exposure. The above information and the current SIKA product data sheet are decisive.

Can I use the product outdoors?
Only to the extent that the respective application is approved by SIKA for outdoor use. The substrate, moisture, temperature and exposure are decisive.

What is important for storage and application?
Store containers closed, dry and within the temperature limits specified by the manufacturer. Observe the product and safety data sheet before application.

Brand note

SIKA®, Sikaflex®, SikaBond®, Sikacryl®, Sikafloor®, Sikagard® and Sikasil® are trademarks of the Sika Group. Technical specifications refer to the SIKA product information available at the time of creation; in case of doubt, the current product data sheet of the manufacturer applies.