beko® Drywall Profile Adhesive SMP Polymer Adhesive White

beko Drywall Profile Adhesive 310 ml white – SMP polymer adhesive for drywall profiles

beko Drywall Profile Adhesive is a high-quality SMP polymer adhesive for screwless installation of UW frame profiles and cladding in drywall applications. The adhesive was specially developed for professional drywall work and enables bonding instead of screwing in suitable applications.

The profile adhesive is TÜV certified and also adheres to damp substrates. Thanks to its high initial adhesion and extremely fast curing, it is ideal for efficient installation work indoors and outdoors.

beko Drywall Profile Adhesive is permanently elastic, shows no shrinkage, and is silicone-, acid-, isocyanate-, and solvent-free. It is also paintable, temperature-resistant from -45 °C to +100 °C, and classified as very low-emission according to GEV-EMICODE® EC 1 Plus.

Your benefits at a glance

• SMP polymer adhesive for drywall
• TÜV certified
• For screwless installation of UW frame profiles and cladding
• Adheres even to damp substrates
• High initial adhesion
• Extremely fast curing
• Extremely high shear strength
• Permanently elastic
• No shrinkage
• Silicone- and acid-free
• Isocyanate- and solvent-free
• Suitable for indoor and outdoor use
• Paintable
• GEV-EMICODE® EC 1 Plus – very low-emission

Processing advantages

• Bonding can be corrected for approx. 15 minutes
• Easy processing with standard cartridge guns
• Bond UW frame profiles instead of screwing
• Bond UW frame profiles and cladding instead of screwing
• No soundproofing sealing tape required
• Clean and fast installation in drywall applications

Areas of application

• Screwless installation of UW frame profiles
• Screwless installation of cladding
• Drywall and interior construction
• Installation work in new builds and renovations
• Bonding profiles to suitable substrates
• Indoor and outdoor applications

Suitable substrates

• Aluminium
• EPS
• OSB boards
• Gypsum board
• XPS
• Insulation boards
• Fibrous insulation materials
• Painted and varnished wood
• Stone
• Concrete
• Polystyrene
• Metal

Resistance

According to the manufacturer, the adhesive is highly resistant to salt water, aliphatic solvents, hydrocarbons, ketones, esters, alcohols, and diluted mineral acids.

Possible limitations / notes

• For unknown, coated, or critical substrates, perform an adhesion and compatibility test beforehand.
• Substrates must be load-bearing, clean, and free from loose components.
• Remove oil, grease, dust, and release agents before processing.
• The cartridge should be processed promptly after opening.
• Full curing depends on temperature, humidity, material thickness, and substrate.
• Observe the manufacturer's specifications, installation instructions, and safety data sheet.

Processing instructions

Before processing, the bonding surfaces must be load-bearing, clean, and free from loose components. Oil, grease, dust, and release agents should be removed. The Drywall Profile Adhesive can also adhere to damp substrates; however, a preliminary adhesion test is recommended for critical substrates.

Insert the cartridge into a suitable cartridge gun and cut the cartridge tip to the desired paddle width. Apply the adhesive evenly, position the profile or component, and align it. The bond can be corrected for approx. 15 minutes.

The adhesive can be processed from 0 °C to a maximum of +40 °C. The skin formation time is approx. 15 minutes ± 5 minutes. Curing is approx. 2 to 3 mm per 24 hours, depending on temperature and environmental conditions.

Technical data

Variants & SKUs

Recommended variant structure for Shopify

Scope of delivery

• Depending on selection: 1 x, 6 x, or 12 x beko Drywall Profile Adhesive 310 ml white

Frequently asked questions

What is beko Drywall Profile Adhesive suitable for?

The adhesive is suitable for the screwless installation of UW frame profiles and cladding in drywall applications.

Is the profile adhesive TÜV certified?

Yes, according to the manufacturer, the Drywall Profile Adhesive is TÜV certified for the screwless installation of UW frame profiles and cladding in drywall applications.

Does the adhesive also adhere to damp substrates?

Yes, according to the manufacturer, the adhesive also adheres to damp substrates.

What color is the adhesive?

beko Drywall Profile Adhesive is white.

Is the adhesive paintable?

Yes, according to the manufacturer, the adhesive is paintable.

What packaging units are available?

Since the manufacturer packaging unit is 12 pcs., we offer the item depending on selection as 1 cartridge, 6 cartridges, or 12 pcs. = 1 unit.

Which substrates are suitable?

Suitable substrates include aluminium, EPS, OSB boards, gypsum board, XPS, insulation boards, fibrous insulation materials, painted and varnished wood, stone, concrete, polystyrene, and metal.

Brand note / Manufacturer

Brand product of beko GmbH. Sold via Bauwolke24.

beko GmbH
Rappenfeldstraße 5
86653 Monheim
Germany

Tel. +49 9091 90898 0
Fax. +49 9091 90898 29
Email: info@beko-group.com