HECO MULTI-MONTI-plus F Screw Anchor – Countersunk Head, Blue Zinc-Plated (A2K)

HECO MULTI-MONTI-plus F (MMS-plus F) – Concrete Screw / Screw Anchor with Countersunk Head

The HECO MULTI-MONTI-plus F (MMS-plus F) is a concrete screw / screw anchor with a countersunk head and T-Drive / Torx drive for quick fixings in concrete and – depending on the version / approval – masonry.

The MMS-plus F is screwed directly into a pre-drilled hole without a plug and is immediately load-bearing. The functional tip cuts an internal thread into the building material, ensuring a positive-locking hold.

Variable Item

This offer is structured as a variable item. You select the diameter, length, and quantity using the selection fields. Depending on the shop configuration, smaller quantities than the manufacturer's standard packing unit may also be possible.

Advantages of the HECO MMS-plus F

• Can be installed without a plug
• Immediately load-bearing
• Countersunk head for flush / surface-level fastenings (application-dependent)
• T-Drive / Torx drive for good power transmission
• Can be used close to edges (according to manufacturer's specifications)
• Can be installed without a torque wrench (according to manufacturer's specifications)
• Demountable, reusable after inspection in suitable cases
• A2K / zinc-plated blue (depending on variant)
• Flexible order quantity, even below standard packing units

Typical Areas of Application

• Fixings in concrete
• Fixings in masonry (depending on approval / variant)
• Mounting of rails, brackets, consoles, and profiles
• Installation and assembly work
• Temporary fixings with subsequent disassembly

Note on Dimensions, Quantities & Versions

This product page summarizes several versions of the HECO MMS-plus F. Depending on the selection, the diameter, length, drive size, material/surface, quantity, packing unit, technical values, and approvals may differ.

For exact technical data and product-specific characteristics, please refer to the HECO reference page for the selected variant (e.g., item no. 49862).

FAQ – Frequently Asked Questions about the HECO MMS-plus F

Can I select diameter, length, and quantity?

Yes. This item is designed as a variant product. Selection is made via the product options.

Can I order less than the standard packing unit?

Yes, depending on the configuration stored in the shop, smaller quantities than the manufacturer's packing unit may also be possible.

What does "MMS-plus F" stand for?

"MMS-plus" stands for HECO MULTI-MONTI-plus, the "F" version for the variant with a countersunk head.

Do I need a plug?

No. The MMS-plus F is screwed directly into the pre-drilled hole without a plug.

Is the MMS-plus F immediately load-bearing?

Yes, a key advantage of the MMS-plus series is its immediate load-bearing capacity after proper installation.

Is the screw demountable?

Yes. The MMS-plus F is demountable and, in suitable cases, can be reusable after inspection.

Which approvals apply?

Different approvals / verifications apply depending on the variant. For the reference version, ETA-15/0784, ETA-15/0785, ETA-20/0132, F120/R120, and sprinkler approval are listed, among others. The manufacturer's documents for the specific variant chosen are always decisive.

For which substrates is the MMS-plus F suitable?

Depending on the variant and approval, for concrete and partly masonry. Please observe the manufacturer's specifications.

Note: For safety-relevant fixings, manufacturer's documents, approvals, and installation guidelines are binding.