KLEIBERIT 535.0 SupraFoam 2C-PUR Door Foam 250 g

What is KLEIBERIT 535.0 SupraFoam?

KLEIBERIT 535.0 SupraFoam is a propellant-free, fast-curing 2K PUR door frame foam for the invisible installation of door frames and panels, as well as for filling, insulating, and sealing work.

The two-component system cures regardless of humidity and achieves high strength after a short time. As the manufacturer states that the foam does not post-expand, it is particularly suitable for precise assembly work where controlled expansion is important.

The variants are organized by container size and quantity. This allows for individual cartridges, half a packaging unit, and full cartons to be selected directly.

Areas of Application

• Installation of door frames
• Invisible fastening of panels
• Window insulation
• Filling work in interior finishing
• Insulation and sealing work
• Assembly work with short curing times

Properties & Advantages

• Extremely fast curing
• Through-curing within approximately 15–20 minutes
• No post-expansion according to manufacturer's specifications
• Curing independent of humidity
• Propellant-free 2K PUR system
• Very low emission according to EC1 Plus
• Building material class B2 according to DIN 4102
• Controlled application using a suitable twin cartridge gun
• Individual, tiered, and full packaging unit variants clearly summarized in one parent article

Technical Data

• Product: KLEIBERIT 535.0 SupraFoam
• Product Type: 2K PUR Door Frame Foam
• Base: Two-component polyurethane
• Content: 210 ml / 250 g
• Through-curing: Approx. 15–20 minutes
• Post-expansion: No post-expansion according to manufacturer's specifications
• Curing: Independent of humidity
• Emission Class: EC1 Plus
• Building Material Class: B2 according to DIN 4102
• Application: With twin cartridge gun 890.0 or 890.1
• Container: 250 g twin cartridge
• Packaging Unit: 16 cartridges per carton

Variants, SKUs & EAN Codes

The following overview facilitates selection, reordering, inventory management, and assignment to the KLEIBERIT manufacturer's item number.

Application Instructions

• The surfaces to be worked on must be clean, stable, and free from dust, grease, oil, and other separating residues.
• Process the cartridge exclusively with a suitable twin cartridge gun.
• Before application, observe the manufacturer's instructions for preparation and activation of the cartridge.
• Apply the foam in a controlled and even manner into the designated gap.
• Align components securely during curing and fix them if necessary.
• Consider the short processing and curing time during work preparation.
• Remove extruded material according to the manufacturer's instructions.
• Perform a test before serial applications or on sensitive surfaces.
• Observe the technical data sheet, safety data sheet, and information on the container.

What does "no post-expansion" mean?

Post-expansion refers to a further increase in the volume of the foam after the actual application. KLEIBERIT 535.0 SupraFoam is described by the manufacturer as having no post-expansion. This allows for more controlled dosing of the foam quantity and reduces the risk of later deformation or additional pressure buildup.

Which gun is needed?

A suitable twin cartridge gun is required for application. The manufacturer names the KLEIBERIT 890.0 or 890.1 versions. A conventional cartridge gun is not suitable for the two-component system.

Matching Accessories & Other KLEIBERIT Products

For application, you will need a suitable KLEIBERIT twin cartridge gun. Further PUR adhesives, wood glues, assembly foams, and special adhesives can be found in our KLEIBERIT collection.

Frequently Asked Questions

What is KLEIBERIT 535.0 SupraFoam used for?

The product is particularly suitable for the installation of door frames, for window insulation, as well as for filling, insulating, and assembly work.

How fast does SupraFoam cure?

Through-curing is stated as approximately 15–20 minutes. The actual processing and load-bearing time must be observed according to the manufacturer's instructions.

Does KLEIBERIT 535.0 post-expand?

No. The manufacturer describes the foam as having no post-expansion.

Is curing dependent on humidity?

No. As a two-component system, SupraFoam cures independently of humidity.

Do I need a special cartridge gun?

Yes. A suitable twin cartridge gun is required for application, for example, KLEIBERIT 890.0 or 890.1.

Can I use a normal cartridge gun?

No. Due to the twin cartridge and the two-component system, a specially designed twin cartridge gun is required.

What quantity tiers are available?

The 250 g twin cartridge is available as a single item, in a tier of 8 cartridges, and as a complete packaging unit of 16 cartridges.

What does building material class B2 mean?

The product is classified as building material class B2 according to DIN 4102. The specific requirements of the respective construction project and the manufacturer's information must be observed.

Where can I find safety and manufacturer information?

Processing, hazard, and safety instructions can be found on the product container, the technical data sheet, and the manufacturer's safety data sheet. The structured manufacturer information is also maintained with the product.

Manufacturer:
KLEIBERIT SE & Co. KG
Max-Becker-Str. 4
76356 Weingarten
Germany

Brand Notice:
Original KLEIBERIT brand product. Sold via Bauwolke24.