Nozar Fugenfrei Special Diamond Disc 100 mm, 0.8 mm
Nozar Fugenfrei Special Diamond Disc 100 mm, 0.8 mm
Out of stock
Herstellerinformationen
Nozar Diamantwerkzeuge
Dipl.-Kfm. Frank Nozar Diamantwerkzeuge GmbH
Winkhausstraße 3
59387 Ascheberg
Tel.: +49 2599 7596 0
Fax: +49 2599 7596 29
E-Mail: info@nozar-diamant.de
Couldn't load pickup availability
Nozar Fugenfrei Spezial Diamond Disc 100 mm, 0.8 mm
The Nozar Fugenfrei Spezial is a narrow diamond tool for milling out existing tile joints. The 100 mm diameter and 0.8 mm milling width allow access to narrow joints. The manufacturer states that it is suitable for both cement-based jointing material and epoxy resin joints. The disc has a 22.23 mm bore and five segments.
Features and Benefits
- For targeted renovation of existing tile joints.
- 0.8 mm narrow working area.
- Described for cement and epoxy resin joints.
- 100 mm outer diameter, 22.23 mm bore and 5 mm coating height.
Application
Before milling, the joint path, actual joint width and depth should be carefully checked. The machine must be able to be guided in a controlled manner so that adjacent tile edges are protected. Especially with narrow joints, a test at an inconspicuous location is recommended. Layers lying behind the jointing material must not be unintentionally affected by an excessive working depth.
Technical Data
| Manufacturer Part Number | Version |
|---|---|
| 6720086 | Diameter (mm): 100; Bore (mm): 22.23; Number of segments: 5; Segment width (mm): 0.8; Segment height (mm): 5.0 |
Selection and Processing
The small milling width alone does not guarantee that every joint can be processed. Sufficient clearance, steady tool guidance and the suitability of the machine are crucial. Even with this special tool, the permissible speed, protective guard and mounting must be suitable for the specific application. The product is intended for joint processing; for standard tile cutting, a suitable tile cutting disc should be selected.
Frequently Asked Questions
Is the tool also suitable for epoxy resin joints?
Yes. Epoxy resin joints are explicitly mentioned in the manufacturer's catalog.
How wide is the working width of the disc?
The specified milling width is 0.8 mm.
Are damage-free tile edges guaranteed?
No. The result depends on the joint width, material condition, tool guidance and selected working depth. Work in a controlled manner and perform a test first.
Order Quantity and Scope of Delivery
Select the desired version and then the quantity of 1, 3 or 6 pieces. One order unit corresponds to the selected quantity. The displayed price is the total price for this quantity.
