SikaBond-151 – Parquet Adhesive

SikaBond-151

Very low-emission, one-component, water-free elastic parquet adhesive based on silane-modified polymers for multi-layer parquet in indoor areas. The following description summarizes the most important manufacturer information for selection and application in a practical manner.

Advantages

• One-component
• Easy to spread
• Solvent-free according to TRGS 610
• Water-free
• Elastic and impact-sound-insulating bonding
• Long open time
• On suitable substrates without prior priming
• Suitable for underfloor heating

Areas of application

• 2- and 3-layer multi-layer parquet
• Cement screeds
• Calcium sulfate screeds
• Wood particleboard P4–P7
• OSB boards class 3–4
• Magnesium screeds and concrete substrates

Technical data

• Chemical base: silane-modified polymers (SMP)
• Density: approx. 1.65 kg/l
• Packaging: 17 kg plastic container
• Shelf life: 12 months
• Storage: dry at +5 °C to +25 °C
• Application temperature: +5 °C to +40 °C
• Air temperature during application: +18 °C to +35 °C
• Relative humidity: 40–70 %

Certifications & tests

• GEV EMICODE EC1PLUS – very low emissions
• Emissions-tested construction product / DIBt approval Z-155.10-498
• LEED v4 EQc 2
• French emission class A+

Application & substrate

• Prepare the substrate so that it is ready for flooring, load-bearing, clean, and sufficiently level.
• Substrate temperature during installation and curing: at least +15 °C; for heated screeds: +18 °C to a maximum of +22 °C.
• For long or wide parquet elements, a larger notched trowel may be required to avoid hollow areas due to insufficient wetting.

Important / possible disadvantages

• Manufacturer approval applies to 2- and 3-layer multi-layer parquet; check other types of parquet separately.
• Substrate moisture, flatness, and site conditions have a direct impact on bonding.

FAQ

Which variant is suitable?
Color and packaging are selected separately. For boxed goods, individual containers, half pallets, and full pallets are available as options, where applicable.

Does it need to be primed?
This depends on SikaBond-155, the substrate, and the exposure. The above information and the current SIKA product data sheet are decisive.

Can I use the product outdoors?
Only to the extent that the respective application is approved by SIKA for outdoor use. The substrate, moisture, temperature, and load are decisive factors.

What is important for storage and application?
Store containers closed, dry, and within the temperature limits specified by the manufacturer. Read the product and safety data sheets before application.

Brand notice

SIKA®, Sikaflex®, SikaBond®, Sikacryl®, Sikafloor®, Sikagard® and Sikasil® are trademarks of the Sika Group. Technical specifications refer to the SIKA product information available at the time of publication; in case of doubt, the current manufacturer's product data sheet applies.