SikaBond-54 Parquet – Parquet adhesive

SikaBond-54 Parquet

Fast-curing, flexible 1K parquet adhesive for full-surface bonding of multi-layer and suitable solid parquet. The following description summarizes the most important manufacturer specifications for selection and application in a practical manner.

Advantages

• 1-component and ready to use
• Water- and solvent-free
• Fast strength development
• Economical, low consumption
• Can be used on many substrates without primer
• Flexible and impact-sound-insulating bond
• Suitable for underfloor heating
• Very low emissions
• Reduces shear stresses between the parquet and the substrate

Applications

• Multi-layer parquet according to DIN EN 13489
• Solid parquet with a width/thickness ratio of maximum 8:1
• Full-surface bonding on suitable screeds and substrates

Technical Data

• Flexible adhesive according to ISO 17178
• Packaging: 13 kg bucket
• Substrate temperature during application and curing at least +15 °C
• For heated screeds, substrate temperature at least +18 °C and maximum +22 °C
• General building authority approval according to SIKA

Certifications & Tests

• ISO 17178
• Very low emissions
• General building authority approval according to the manufacturer

Application & Substrate

• The substrate must be ready for flooring, level, clean, dry, and load-bearing.
• Apply the adhesive with a suitable notched trowel so that the back of the parquet is sufficiently wetted and hollow areas are avoided.
• Observe the recognized rules for parquet installation, in particular ATV DIN 18356.

To Note / Possible Disadvantages

• Solid parquet is only approved within the dimensional limits specified by SIKA.
• Insufficient flatness or incorrect notching can lead to inadequate wetting and hollow areas.
• Wood and substrate moisture must be checked before installation.

FAQ

Which variant is suitable?
Color and packaging are selected separately. For boxed goods, individual units, half pallets, and full pallets are available for selection – as provided.

Does it need to be primed?
This depends on SikaBond-54 Parquet, the substrate, and the exposure. The above-mentioned notes and the current SIKA product data sheet are decisive.

Can I use the product outdoors?
Only to the extent that the respective application is approved by SIKA for outdoor use. The substrate, moisture, temperature, and load are decisive.

What is important for storage and application?
Store the packaging closed, dry, and within the temperature limits specified by the manufacturer. Observe the product and safety data sheet before application.

Brand Notice

SIKA®, Sikaflex®, SikaBond®, Sikacryl®, Sikafloor®, Sikagard® and Sikasil® are trademarks of the Sika Group. Technical specifications refer to the SIKA product information available at the time of creation; in case of doubt, the current product data sheet of the manufacturer applies.